My 20b Fc
#21
[quote name='sillbeer' date='May 17 2005, 10:45 PM']How much are you cutting out for your radiator? I measured and could only fit 26 1/2" wide or so.
-Destin
[/quote]
Frame rail to frame rail is 29" I believe, I will toss a tape on it when I get done with classes today.
-Destin
[snapback]714514[/snapback]
[/quote]
Frame rail to frame rail is 29" I believe, I will toss a tape on it when I get done with classes today.
#22
[quote name='the spyder' date='May 18 2005, 08:47 AM']Frame rail to frame rail is 29" I believe, I will toss a tape on it when I get done with classes today.
[/quote]
Hurms looks like if I wanted to I could squeeze a 28 in there. However... Looks likea 26 it will be! Just because its much simpler then screwing with 1/2inch of clearance at most on each side.
Hoof hearted should be in here any time soon, he should also hurry up and order the 26x19x3 radiator .
[snapback]714670[/snapback]
[/quote]
Hurms looks like if I wanted to I could squeeze a 28 in there. However... Looks likea 26 it will be! Just because its much simpler then screwing with 1/2inch of clearance at most on each side.
Hoof hearted should be in here any time soon, he should also hurry up and order the 26x19x3 radiator .
#24
[quote name='sillbeer' date='May 18 2005, 05:15 PM']I'm going to order a custom radiator from Griffin. I bought one from them for my gs300 and they did an excellent job. Probably 26x19x3.
-Destin
[/quote]
How much for there custom one?
-Destin
[snapback]714941[/snapback]
[/quote]
How much for there custom one?
#25
[quote name='the spyder' date='May 18 2005, 12:47 PM']Hurms looks like if I wanted to I could squeeze a 28 in there. However... Looks likea 26 it will be! Just because its much simpler then screwing with 1/2inch of clearance at most on each side.
Hoof hearted should be in here any time soon, he should also hurry up and order the 26x19x3 radiator .
[/quote]
Ordered this morning. Aluminum radiator from Fluidyne.
Hoof hearted should be in here any time soon, he should also hurry up and order the 26x19x3 radiator .
[snapback]714797[/snapback]
[/quote]
Ordered this morning. Aluminum radiator from Fluidyne.
#26
[quote name='hoofhearted' date='May 19 2005, 12:35 PM']How much for there custom one?
[/quote]
I was the first person to request a radiator for the lexus gs300 so I sent them mine as a template. They cut me a deal since I sent them my original. $300. Not sure how much they charge for the same radiator though.
-Destin
[snapback]715403[/snapback]
[/quote]
I was the first person to request a radiator for the lexus gs300 so I sent them mine as a template. They cut me a deal since I sent them my original. $300. Not sure how much they charge for the same radiator though.
-Destin
#27
I got the aluminum flywheel, stage 3 clutch, pressure plate, throw out bearing, needle bearing and clutch alignment tool, delivered to me yesterday. Should be installed by this weekend.
Clutch Masters Stage 3 clutch;
Segmented Kevlar disc;
Segmented Kevlar friction material;
Precision heat treated single diaphragm;
Re-arched diaphragm for supior disengagement;
Heavy-duty straps;
Very high clamping force;
Steel backing plate;
Spring Hub;
OEM or better releasing bearing;
Pilot bearing;
Alignmnet Tool;
I had to buy more than one to get a discount. If any one wants the other it's for sale ($595 retail) - $516.00 + shipping (no handling costs, just actual shipping costs.)
Also got a Fidanza aluminum flywheel at a super price 350.00 + shipping (had to buy more than one). The second aluminum flywheel is for sale.
I still have FS an extra clutch set and aluminum flywheel for a TII. The flywheel is suppose to fit all 13b's RX4-RX8 (and 20b's) but need a flex plate. Reduced price if you mention you saw it here on the 20b forum.
[attachment=31016:attachment]
Clutch Masters Stage 3 clutch;
Segmented Kevlar disc;
Segmented Kevlar friction material;
Precision heat treated single diaphragm;
Re-arched diaphragm for supior disengagement;
Heavy-duty straps;
Very high clamping force;
Steel backing plate;
Spring Hub;
OEM or better releasing bearing;
Pilot bearing;
Alignmnet Tool;
I had to buy more than one to get a discount. If any one wants the other it's for sale ($595 retail) - $516.00 + shipping (no handling costs, just actual shipping costs.)
Also got a Fidanza aluminum flywheel at a super price 350.00 + shipping (had to buy more than one). The second aluminum flywheel is for sale.
I still have FS an extra clutch set and aluminum flywheel for a TII. The flywheel is suppose to fit all 13b's RX4-RX8 (and 20b's) but need a flex plate. Reduced price if you mention you saw it here on the 20b forum.
[attachment=31016:attachment]
#29
hello does anyone know the weight increase th 20b with a single turbo converison has over the 13b? and can mst of the weight be counterd if replacing items such as bumpers finders and hood with carbon fiber/ fiberglass? thank you and you hav a nice car.
#30
26x19x3
3" race core
3" inlet/outlet
5 bar pressure tested
Core Length : 24"
Core Height: 12"
Core Thickness: 3"
Inlet Size: 3"
Outlet Size: 3"
End to End" Length: 780.5mm"
[attachment=31834:attachment][attachment=31835:attachment][attachment=31836:attachment]
3" race core
3" inlet/outlet
5 bar pressure tested
Core Length : 24"
Core Height: 12"
Core Thickness: 3"
Inlet Size: 3"
Outlet Size: 3"
End to End" Length: 780.5mm"
[attachment=31834:attachment][attachment=31835:attachment][attachment=31836:attachment]