Major League engine
12-02-2005, 09:16 PM
#1
Junior Member
Thread Starter
Join Date: May 2005
Location: So Cal (EAST LA)
Posts: 16
Hi everybody,i have found some really good pictures of the engine bay from the ML rx8
They are claiming the car is the fastes puerto rican rotary but in reality the engine was built
NZ using an engine they sell as a package, It was tested on a R100 chassis but never shown to anyone till now,oh well here they are,late but true.
They are claiming the car is the fastes puerto rican rotary but in reality the engine was built
NZ using an engine they sell as a package, It was tested on a R100 chassis but never shown to anyone till now,oh well here they are,late but true.
12-02-2005, 09:42 PM
#4
Junior Member
Join Date: Oct 2005
Location: Australia, Melbourne
Posts: 20
those pics you posted are not of the major league rx8.
they are of a workshops (KIWI RE) rx2 coupe from New Zealand (which unfortunately caught fir on its first pass down the drag strip and is slowly being repaired) that built the engine for major league.
and i think major leagues engine has three turbos not two.
they are of a workshops (KIWI RE) rx2 coupe from New Zealand (which unfortunately caught fir on its first pass down the drag strip and is slowly being repaired) that built the engine for major league.
and i think major leagues engine has three turbos not two.
12-03-2005, 03:27 AM
#5
Junior Member
Join Date: Oct 2003
Location: U.K.
Posts: 17
Originally Posted by EVLRX-4' post='783354' date='Dec 2 2005, 07:42 PM
those pics you posted are not of the major league rx8.
they are of a workshops (KIWI RE) rx2 coupe from New Zealand (which unfortunately caught fir on its first pass down the drag strip and is slowly being repaired) that built the engine for major league.
and i think major leagues engine has three turbos not two.
The Major League RX8 has already set a Peurto Rico National record with a 6.81 @ 200.6 mph also taking it to the second fastest Mazda in the world!!. Kiwi-RE carried out the engine development on the car with one of our 3 rotor engine packages that we developed in house. The car is very new and has only a hand full of run's to date. We have very high expectations for this car to go to number one in the world!. This is also the only car in the world to have a KRE customer crate engine that has run under 7seconds.
Kiwi-RE 3 rotor 3 turbo Engine
Liberty 5 speed
Hanson Chassis
Maiky Performance
Gaby Racer shop
Seguel Dynojet
R.
12-03-2005, 10:44 AM
#8
Senior Member
Join Date: Mar 2003
Location: Disclaimer: posts made after 11AM are most likely alcohol induced. Please disregard unless very funn
Posts: 2,436
Originally Posted by nopistons94' post='783428' date='Dec 3 2005, 09:46 AM
is there no intercooler on that car?
not needed on a methanol/alcohol car
12-08-2005, 04:13 PM
#9
Junior Member
Join Date: Oct 2005
Location: Australia, Melbourne
Posts: 20
Originally Posted by ccarlisi' post='783453' date='Dec 4 2005, 03:03 AM
This was posted in another thread awhile back.
that is also a engine that is from a car that is no more.
thats mazfix from Australia engine in there chev berreta that has gone 6.99@201mph.
when the car had its accident it was going down the race track and got some wheel spin so the driver got off the gas then got back on it and the car wheel spun again but more harder and went sideways into the right wall just after then finish line then smashed into the other wall on the left side of the race track then came to a stop in the right lane.
the car that was in the right lane had got off the gass in his run down the drag strip and was just coasting down the track when he saw the car in the left lane crash and so he jumped on the breaks and stopped with in 10 feet of the car that crashed
01-09-2006, 01:28 PM
#10
Member
Join Date: Aug 2005
Posts: 38
There's a lot of powerfull mazdas here in Puerto Rico, for example: Siguel Racing 3rotor 20B Twin Turbo 6.89 @ 199mph. Also here in Puerto Rico is the fastest aspirated (no turbo) 3rotor 20B with 7.77 @ 171mph. the fastest 13B-2rotor turbo with 7.34 @ 180mph and the fastest 13B-2rotor aspirated with 8.05 @ 160mph.