FORSALE: 20B and TURBO KIT
03-27-2006, 07:59 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2006
Posts: 2
Up forsale is my 20B c series engine, it has been dowelled, ext ported and fitted with 2mm PNS racing seals, this engine was built to make 1000hp reliably,0 klms on fresh built engine, i have a s6 RX7 5speed gearbox also with a twin plate clutch and lighweight flywheel, Garrett TA51 turbo with 1.15 hot side and 76 cold side.
This sale also c/w all unused front cut parts such as standrad manifolds and turbos, ecu etc
would prefer to sell the lot as a package although may seperate.
$4500 The lot
$3500 block only
Shipping anywhere in the US add $400 which incl insurance also.
I am contactable on cell 0406 532 780 or email D1_350z@hotmail.com
Australia
This sale also c/w all unused front cut parts such as standrad manifolds and turbos, ecu etc
would prefer to sell the lot as a package although may seperate.
$4500 The lot
$3500 block only
Shipping anywhere in the US add $400 which incl insurance also.
I am contactable on cell 0406 532 780 or email D1_350z@hotmail.com
Australia
05-10-2006, 04:07 PM
#6
Junior Member
Join Date: May 2006
Location: Lubbock Texas
Posts: 21
Is this motor mackage still for sale?
Up forsale is my 20B c series engine, it has been dowelled, ext ported and fitted with 2mm PNS racing seals, this engine was built to make 1000hp reliably,0 klms on fresh built engine, i have a s6 RX7 5speed gearbox also with a twin plate clutch and lighweight flywheel, Garrett TA51 turbo with 1.15 hot side and 76 cold side.
This sale also c/w all unused front cut parts such as standrad manifolds and turbos, ecu etc
would prefer to sell the lot as a package although may seperate.
$4500 The lot
$3500 block only
Shipping anywhere in the US add $400 which incl insurance also.
I am contactable on cell 0406 532 780 or email D1_350z@hotmail.com
Australia
Originally Posted by 350z' post='810458' date='Mar 27 2006, 08:59 PM
Up forsale is my 20B c series engine, it has been dowelled, ext ported and fitted with 2mm PNS racing seals, this engine was built to make 1000hp reliably,0 klms on fresh built engine, i have a s6 RX7 5speed gearbox also with a twin plate clutch and lighweight flywheel, Garrett TA51 turbo with 1.15 hot side and 76 cold side.
This sale also c/w all unused front cut parts such as standrad manifolds and turbos, ecu etc
would prefer to sell the lot as a package although may seperate.
$4500 The lot
$3500 block only
Shipping anywhere in the US add $400 which incl insurance also.
I am contactable on cell 0406 532 780 or email D1_350z@hotmail.com
Australia
05-12-2006, 11:52 AM
#7
Junior Member
Join Date: May 2006
Location: Lubbock Texas
Posts: 21
Tell more about the engine. You said it was built for 1000 hp. Does that mean massive D porting or perphial porting or just planning on big boost? Does it have any type intake manifold or exhaust manifolds? Can you send som pics? Is that $4500 in US dollars?
Thanx
Bob Mears
bmears9413@aol.com
Up forsale is my 20B c series engine, it has been dowelled, ext ported and fitted with 2mm PNS racing seals, this engine was built to make 1000hp reliably,0 klms on fresh built engine, i have a s6 RX7 5speed gearbox also with a twin plate clutch and lighweight flywheel, Garrett TA51 turbo with 1.15 hot side and 76 cold side.
This sale also c/w all unused front cut parts such as standrad manifolds and turbos, ecu etc
would prefer to sell the lot as a package although may seperate.
$4500 The lot
$3500 block only
Shipping anywhere in the US add $400 which incl insurance also.
I am contactable on cell 0406 532 780 or email D1_350z@hotmail.com
Australia
Thanx
Bob Mears
bmears9413@aol.com
Originally Posted by 350z' post='810458' date='Mar 27 2006, 08:59 PM
Up forsale is my 20B c series engine, it has been dowelled, ext ported and fitted with 2mm PNS racing seals, this engine was built to make 1000hp reliably,0 klms on fresh built engine, i have a s6 RX7 5speed gearbox also with a twin plate clutch and lighweight flywheel, Garrett TA51 turbo with 1.15 hot side and 76 cold side.
This sale also c/w all unused front cut parts such as standrad manifolds and turbos, ecu etc
would prefer to sell the lot as a package although may seperate.
$4500 The lot
$3500 block only
Shipping anywhere in the US add $400 which incl insurance also.
I am contactable on cell 0406 532 780 or email D1_350z@hotmail.com
Australia
Thread
Thread Starter
Forum
Replies
Last Post
mako
RX-7 & RX-8 Parts For Sale & Wanted
9
06-17-2003 07:21 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)