e-shaft numbering
08-24-2007, 09:27 PM
#1
Senior Member
Thread Starter
Join Date: Dec 2006
Posts: 131
hey guys
so heres the dilemer, i was on ausrotary haveing a yarn with another guy about the numbers stamped into the 20b e-shaft.
now should these numbers match those stamped on the housings and irons?
if not what do they mean?
his was a c series engine and the shaft was stamp 20,mines a d series and is stamped 26
both these numbers in now way corospond to our engine numbers(that i know of)
http://www.ausrotary.com/viewtopic.php?t=137354
^
thats the link to the conversation we had about it.
can any one shed some light on this
so heres the dilemer, i was on ausrotary haveing a yarn with another guy about the numbers stamped into the 20b e-shaft.
now should these numbers match those stamped on the housings and irons?
if not what do they mean?
his was a c series engine and the shaft was stamp 20,mines a d series and is stamped 26
both these numbers in now way corospond to our engine numbers(that i know of)
http://www.ausrotary.com/viewtopic.php?t=137354
^
thats the link to the conversation we had about it.
can any one shed some light on this
08-31-2007, 08:05 PM
#3
Member
Join Date: Nov 2003
Posts: 40
Originally Posted by hsmidy' post='881236' date='Aug 24 2007, 06:27 PM
hey guys
so heres the dilemer, i was on ausrotary haveing a yarn with another guy about the numbers stamped into the 20b e-shaft.
now should these numbers match those stamped on the housings and irons?
if not what do they mean?
his was a c series engine and the shaft was stamp 20,mines a d series and is stamped 26
both these numbers in now way corospond to our engine numbers(that i know of)
http://www.ausrotary.com/viewtopic.php?t=137354
^
thats the link to the conversation we had about it.
can any one shed some light on this
so heres the dilemer, i was on ausrotary haveing a yarn with another guy about the numbers stamped into the 20b e-shaft.
now should these numbers match those stamped on the housings and irons?
if not what do they mean?
his was a c series engine and the shaft was stamp 20,mines a d series and is stamped 26
both these numbers in now way corospond to our engine numbers(that i know of)
http://www.ausrotary.com/viewtopic.php?t=137354
^
thats the link to the conversation we had about it.
can any one shed some light on this
That was me
The best I know is the shaft number should match - this is the general concensus. I've now been told the number on the shaft is on one side and the letter is on the opposite side. Look there for the letter.
Thread
Thread Starter
Forum
Replies
Last Post
chase78
Rotary Engine Building, Porting & Swaps
4
09-16-2005 02:33 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)