Racer X

So yur just using the FDs leading coils is there 2 outputs for plugs on each coil?Or are you running it direct fire?

j9fd3s

each rotor has its own coil , if i was to do it again each spark plug would have its own coil



mike

Racer X

Thats what I'm thinking.Using FC coils and run it direct fire.But I would have to power them in series wouldn't I?

j9fd3s

yup, and with fc coils you need ignitors too. the cool setup right now is a gm/nd coil that has a buit in ignitor and they are like $30



mike

Racer X

Cool that would simplify things a bit more.Where do you get them from and do you just wire them in series?I need to start researching this swap and the more info the merrier.

Racer X

I already know this would be a costly swap.I'll need twin heavy duty oil coolers and fans and a big *** IC and custom IC piping to go with it.Then standalone with a T2 tranny flywheel,clutch and counterwieght to go on top of that.This sounds like a fun project if I under go it.

j9fd3s

you can get em at any autoparts store, they are ls1/lt1 coils. they each get 12v power and each coil gets an input from the ecu



mike

Racer X

So with standalone like a haltech then theres a signal wire for each coil then?Then each coil will fire at the appropiate time?

Racer X

Where do people get 20B carbs?Check out this J-spec 20B carbed FB.

Looks like a decent fit.Looks like all motor setup tho. I want to find one with a turbo setup on it.

Racer X

I just noticed that the dizzy on that 20B is the SE one.That I guess is needed to run it carbed.