1st Generation Specific 1979-1985 Discussion

Wrecker Engine.....

Old Dec 28, 2002 | 03:18 PM
  #1  
Racer X's Avatar
Thread Starter
Senior Member
 
Joined: Sep 2002
Posts: 5,542
From: Vanderhoof,BC(Canada)
Default

Any ideas on what is causing this???The last engine had no problems this one keeps climbing after 4000rpm I killed it at 5000.





HELP!!!
Old Dec 28, 2002 | 03:36 PM
  #2  
Racer X's Avatar
Thread Starter
Senior Member
 
Joined: Sep 2002
Posts: 5,542
From: Vanderhoof,BC(Canada)
Default

I thought it might be my throttle sticking but it still does it.



HELP!!!! PLEASE!
Old Dec 29, 2002 | 12:26 PM
  #3  
Racer X's Avatar
Thread Starter
Senior Member
 
Joined: Sep 2002
Posts: 5,542
From: Vanderhoof,BC(Canada)
Default

Old Dec 29, 2002 | 12:56 PM
  #4  
setzep's Avatar
Senior Member
 
Joined: Dec 2002
Posts: 911
From: Minnesota
Default

sounds like you have one hellofa vac leak to allow it to rev that high. maybe the secondary blades a stuck open a little? Is your brake booster hooked up?
Old Dec 29, 2002 | 01:07 PM
  #5  
vosko's Avatar
Super Moderator
 
Joined: Jul 2001
Posts: 17,839
From: NJ
Default

check your injector grommets.......basically need to take everything apart and recheck it
Old Dec 29, 2002 | 01:14 PM
  #6  
Racer X's Avatar
Thread Starter
Senior Member
 
Joined: Sep 2002
Posts: 5,542
From: Vanderhoof,BC(Canada)
Default

Originally Posted by setzep' date='Dec 29 2002, 10:56 AM
sounds like you have one hellofa vac leak to allow it to rev that high. maybe the secondary blades a stuck open a little? Is your brake booster hooked up?
Yeah I'm gonna go and check the vaccum lines and double check the hoses.It was fine on the previous engine and there is nothing different between the two so I should be ready to try it out.
Old Dec 29, 2002 | 01:15 PM
  #7  
Racer X's Avatar
Thread Starter
Senior Member
 
Joined: Sep 2002
Posts: 5,542
From: Vanderhoof,BC(Canada)
Default

I'll post more info on it tonight.
Old Dec 29, 2002 | 08:24 PM
  #8  
Racer X's Avatar
Thread Starter
Senior Member
 
Joined: Sep 2002
Posts: 5,542
From: Vanderhoof,BC(Canada)
Default

I found somemore to my problem.If I let it rev it will go to 6800rpm then die out with a nice flame. I think it might be a timing related problem.Not to sure which way the dizzy goes in the engine tho when you line everything up on it.Does it go in so the tally points towards the alternator????
Old Dec 29, 2002 | 11:13 PM
  #9  
setzep's Avatar
Senior Member
 
Joined: Dec 2002
Posts: 911
From: Minnesota
Default

Originally Posted by vosko' date='Dec 29 2002, 01:07 PM
check your injector grommets.......basically need to take everything apart and recheck it
wait...you have a fuel injected engine in your FB? I was thinking 12a carb. But anyways.. If it will rev to 6800 the throttle must be open. I don't think any vac leak could cause it to rev that high...well unless you didn't hook up any of the vac lines on the car
Old Dec 30, 2002 | 09:50 PM
  #10  
Racer X's Avatar
Thread Starter
Senior Member
 
Joined: Sep 2002
Posts: 5,542
From: Vanderhoof,BC(Canada)
Default

Originally Posted by setzep' date='Dec 29 2002, 09:13 PM
wait...you have a fuel injected engine in your FB? I was thinking 12a carb. But anyways.. If it will rev to 6800 the throttle must be open. I don't think any vac leak could cause it to rev that high...well unless you didn't hook up any of the vac lines on the car
Yeah I have a RB/Delorto setup.I need to check my carb out tommorow when its light out and figure this thing out.It was fine before I had to swap engines. :rant: I want my car to live again.

Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:01 AM.