Just saw this thread, I'll see if I can take some pix tonight of my setup.



J

 

Here it is, the stock s3 oil cooler mounting point

 

Thanks, but can someone take a picture of the rubber piece mounted to the car? I'm only asking because I need to fabricate two of these pieces and wish to know how they are installed on the car. From what I see, a suitable chunk of rubber on either end with two studs may work, but I'd like to compare my idea with the original part.

 

Hm. Well, on mine at least, the rubber is not mounted to the car, but rather on the oil cooler itself, one on each end.

 

Ok here are some pictures that may or may not help. No laughing at my bugs and rust please if you want other angles I'll see what I can do.



http://www.willowroot.ca/private/



J

 

the rubber bits go between the cooler and the bracket on the car. they are available seperately



mike

 

Will se mounts work on a non Se cooler to bolt it up?

 

Looks to me that there is a bracket with two 90 degree bends that bolts to the car on one end and to the cooler on the other, with a rubber slab in between. Am I correct? Should be simple to make if that's the case.

 

Thats how my Se mounts are.I'm wondering if I can swap my SE ones on and mount it that way like on the se or if I need a SE specific cooler.