I used to have my choke hooked up to the barrel adjuster in the red tho.Just left it off this time seeing as it is a summer car for now.
|
cool, I'd never seen a dellorto before.
|
|
Originally Posted by Directfreak' date='Mar 7 2003, 07:32 PM
http://www.gruntled.com/Dellorto/MyInstall.jpg
Check Out Gruntled.com for all your Dell'Orto questions. |
1 Attachment(s)
reacer, where are these hoses attached to?? i have them currently to each othhr cause i thought they were for the OMP. but yours seem to go to the distributor. is that how yours is set up. the one directfreak posted seems to have the OMP attached to them.
thanks |
Mine are attached directly to the distributer.I guess you could tee off one of them and use it for the OMP
|
http://www.gruntled.com/Dellorto/13BPhoto.jpg
Check HERE for Installation instructions. Check out the previous link I posted. https://www.nopistons.com/forums/pub..._DIR#>/dry.png |
wow thats good stuff df!
mike |
I never did this instead I blocked off both passages.Will this affect the engines performance that much?
8. Connect the long 3/8" diameter hose which is connected to the back of the water pump housing to the 3/8" tube extending up form the rear housing. The routing of this hose is very important, since it must clear the throttle linkage. Check for clearance at full throttle as you perform the next step. Luis |
Originally Posted by Racer X' date='Mar 8 2003, 11:01 PM
I never did this instead I blocked off both passages.Will this affect the engines performance that much?
8. Connect the long 3/8" diameter hose which is connected to the back of the water pump housing to the 3/8" tube extending up form the rear housing. The routing of this hose is very important, since it must clear the throttle linkage. Check for clearance at full throttle as you perform the next step. Luis |
All times are GMT -5. The time now is 09:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands