Project Update
06-05-2004, 07:51 PM
#53
Senior Member
Thread Starter
Join Date: Jul 2002
Location: Fayetteville, Georgia
Posts: 2,483
I busted this up trying to get the 19mm bolt off. The one from my 12a (I don't know what the part is called), looks exactly the same, is it alright for me to use that part on the Cosmo?
06-05-2004, 07:52 PM
#55
Senior Member
Thread Starter
Join Date: Jul 2002
Location: Fayetteville, Georgia
Posts: 2,483
Should I be worried about what looks like a manufactured hole in the housing (at the bottom)? I mean it looks like it's supposed to be that way...is that why DF has a scatter shield? LOL.
06-05-2004, 08:17 PM
#57
Senior Member
Join Date: May 2002
Location: California
Posts: 22,465
Originally Posted by Dysfnctnl85' date='Jun 5 2004, 04:52 PM
Should I be worried about what looks like a manufactured hole in the housing (at the bottom)? I mean it looks like it's supposed to be that way...is that why DF has a scatter shield? LOL.
06-05-2004, 09:06 PM
#60
Senior Member
Join Date: Nov 2003
Posts: 480
The thing you broke looks like the crank pulley hub. The 12A one will
fit but check the bolt pattern with the pulley you want to use.
Having said that - removing this part can be a bad thing, as it allows
things to slide on the eccentric shaft and drop a thrust bearing off
the spacer it sits on. Then when you tighten the pulley bolt, the bearing
gets crushed.
fit but check the bolt pattern with the pulley you want to use.
Having said that - removing this part can be a bad thing, as it allows
things to slide on the eccentric shaft and drop a thrust bearing off
the spacer it sits on. Then when you tighten the pulley bolt, the bearing
gets crushed.