NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   1st Generation Specific (https://www.nopistons.com/1st-generation-specific-16/)
-   -   Overheating ? (pics) (https://www.nopistons.com/1st-generation-specific-16/overheating-pics-33099/)

T-Deuce 02-02-2004 07:53 PM

1 Attachment(s)
https://www.nopistons.com/forums/pub...1047683358.gif what exactly is going on w/ my five letter ? i just picked it up from Maztech in tampa today and when i stopped and idled for maybe 10-15 minutes i got out of the car to notice coolant all over the ground (passenger side) i turn off the car (temp gauge=HOT) leave the fans running (they were on when this happened wtf ?!) and pop the hood when i lift it up the cap pops off the overflow tank and the coolant starts gushing out of the overflow tank straight up in the air like 4-5 ft after it is done spraying that **** everywhere (including in my carb) the hose is shooting out white smoke (smells like a normal overheat) for like 30 mins. The radiator looks fine i put water in rad. and overflow tank just to make it home and on the way home i have to stop again b/c the damn thing is running hot! it didnt even do this b4 i took it to Maztech ... what the hell is going on ?? thanks for ur help https://www.nopistons.com/forums/pub..._DIR#>/sad.png

T-Deuce 02-02-2004 07:54 PM

1 Attachment(s)
another

T-Deuce 02-02-2004 07:54 PM

1 Attachment(s)
another

T-Deuce 02-02-2004 07:54 PM

1 Attachment(s)
last one

T-Deuce 02-02-2004 07:57 PM

if anything is visibly wrong (besides non-cooling issues - i know half everything under that hood is ghetto-rigged - i just want it to work) please let me know, or if you think you might have a suggestion involving something not visibly obvious it would be much appreciated - once again thanks alot

'79rx7 02-02-2004 08:03 PM

I'm going to go with :



A. Thermostat be sure it's a factory mazda one

B. Wrong pressure radiator cap

C. Radiator... may need rotted out...

T-Deuce 02-02-2004 08:09 PM

how do i find out if the thermostat is factory mazda ... and what pressure should the radiator cap say on it ??? keep in mind that i drove the car all over the place for a while b4 it got impounded ... so it sat for a while, i got some problems fixed and now it has this problem

Racer X 02-02-2004 09:11 PM

Damn thats a sweet looking bay you have thier.What fans are those?

'79rx7 02-02-2004 09:12 PM

someone correct me if there is another way... but to my knowledge the only way to tell if it's a factory mazda thermostat is that it will have a small hole in the surface which is a bypass, bleed through...



and the cap i think should be around 9-12... can't remember for sure i'll check and let you know

drifter 02-02-2004 09:43 PM

Did you say the radiator cap popped off or the overflow bottle cap popped off?


All times are GMT -5. The time now is 11:59 PM.


© 2024 MH Sub I, LLC dba Internet Brands