1st Generation Specific 1979-1985 Discussion

noob with some fuel pump questions

Thread Tools
 
Search this Thread
 
Old Aug 20, 2012 | 08:05 PM
  #1  
golden_eel's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2012
Posts: 3
From: way down south
Default noob with some fuel pump questions

first off hello iam new here i have a 81 gsl rx7. i bought it for 1200 with 70,000 mi. has been running good but the other day i went on a short trip to the store and when i hopped back in the car it wouldnt start. it was like i was out of fuel so i pushed it to the pump put some in and after a little cranking it fired up and off i went happened again so i was checking the fuel pump and it was running but wouldnt suck up any fuel i had in a gas can, and really sounded week. opened it up and was full of black soot. its a mallory comp pump part #4070 anyone have this problem? they sell rebuild kits for 45 bucks. should i try to rebuild?
thanks
Old Aug 22, 2012 | 12:34 AM
  #2  
High Speed Promotions's Avatar
Junior Member
 
Joined: Jan 2007
Posts: 7
From: Detroit
Default Re: noob with some fuel pump questions

Have you replaced the fuel filter
Old Aug 22, 2012 | 07:22 AM
  #3  
1988RedT2's Avatar
Super Moderator
 
Joined: Apr 2002
Posts: 2,535
From: VA
Default Re: noob with some fuel pump questions

You could try rebuilding it if you think the pump motor and hard parts are in good condition. For 45 bucks though, I'd look at buying a whole new pump. Rockauto lists a couple choices for that money.

Edit: I just looked up that pump number. Looks like a high flow unit that probably pushes more fuel at a higher pressure than you need if you're running a 12A in stock form. I'd be looking at a stock replacement pump.

Also, if the current pump is gunked up, you might want to check out what's in your fuel tank. If there's a bunch of junk in there, it will foul the new pump too. Make sure you've got a good filter between the tank and the pump.

Last edited by 1988RedT2; Aug 22, 2012 at 07:27 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Base_FC_Drifter
Meet and Greet
1
Apr 30, 2013 05:53 PM
keg3468
2nd Generation Specific
2
Apr 6, 2010 01:30 PM
Bopgun
1st Generation Specific
2
Feb 19, 2009 01:23 PM
boogerboy
Rotary Engine Building, Porting & Swaps
14
Apr 24, 2007 08:01 AM
Baldy
ECU Discussions
9
Jan 27, 2004 08:05 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 07:21 PM.