Hey guys,
I'm new to this forum but not new to RX-7's, I've spent a good amount of time on the www.rx7club.com. Anyhow here's Pictures of my ride and soon to come new rolling chassis and my soon to be Color. Let me know what you guys think. Also as far as mods list here it goes: Street Ported Engine RB SP 465cfm Holley Carb RB SP intake SDJ Headers Custom 2.5" exhaust piping Single Magnaflow single inlet dual outlet muffler Mallory Comp 140 fuel pump Holley regulator (Regulated to about 6psi) Wheels are ASA 14x6 (not sure on specific type) Tokico Blues Eibach Spring SS Braided Brake lines Optima Red Top Battery Fully rebuilt Calipers (Sandblasted and look like new) All undercarriage parts are being sandblasted and are being painted with POR-15 in a silver and Black Scheme Soon to installed and some to come: IDA throttle bodies with bosch injector Intank Walbro Pump (Unit modified from 2nd gen into 1st gen) Haltech Computer -6 AN feed and return line SS braided lin 3/8" Russels Anodized Red Aluminium Hard brake lines Mallory 4309 Regulator Big brake kit upgrade from ReSpeed (including 5 Lug rear axles) Camber Plates also from ReSpeed Front mount Oil cooler from GSL-SE with new braided lines. Gilmer Drive Rotrex Supercharger Aluminum Plenum to be mounted ontop of IDA bodies PLX Wideband Nexus Guages Carbon fiber: Vented Hood, Door skins, Headlight covers, Header panel, Wiper Cowl Panel, Sunroof Drain covers, Center Console, Power Window switch Panel, (Full Dash and sunroof if these get made too) New Shell is arriving soon, underneath was sandblasted, epoxied, and truck bed linered up. Body will be painted McLaren SLR green color Still unsure about Ignition Upgrade choice I hope that I have enought pictures for now lol ... Let me know what you guys think ... especially about the color. Thanks Sam Here's the Link to the Rotrex Supercharger too "http://www.rotrex.com/" I think that i might be mating that to the Antonov 2 speed unit. |
Looks great!
|
i really like that green color
|
Nice work. 147 to the ground with a 12aSP and holley. Flat torque curve.
|
CLEAN! WOW! looks like you've put some serious work into it! And that kind of green was one of my colour choices for my respray! I think it'll look awesome! keep us updated! It'll definatly be one of the cleanest FB's around!
|
Originally Posted by 12aJBridgeport' post='862518' date='Mar 7 2007, 11:31 AM
Nice work. 147 to the ground with a 12aSP and holley. Flat torque curve. Ya I should be able to make more too, this is lacking ignition mods which should help torque and more HP in the top end, also if you notice the fuel curve line it still needed some work at the higher RPM i needed to buy a jetting plate to put inbetween the carb and ther secondary float, but I'm ditching this to going to the FI. But I should be able to squeeze out i think about 155-160 hp to the wheels which hopefully about anothe 5 ft-lb of torque or so maybe more. The really cool thing is that, I orgininally picked up this car from a junk yard and making it come to life like this really brings smile to my face. Especially concerning that this is my first car ever and have never attempted working a car at this extensive level. Before i bought the car, i was suppose to get a motorcycle but my parent didn't really approve of that ... that was after i got all my gear and license ( they said that they were just waiting for me to chicken out) guess i should of told them how many times i was caught speeding on a bycicle https://www.nopistons.com/forums/pub...#>/biggrin.gif. Anyhow so i still wanted something that would rev similar to it and after much extensive research i had to get one of these cars. Without luck trying to find a running one for a decent price or shape, i called around junkyard and found this and fell in love. And here she is now, a alot more learning about cars .... now i fix all kinds of them in my own drive way especially this one https://www.nopistons.com/forums/pub...#>/biggrin.gif Thanks for all the compliments guys ... if you think I should upgrade to something else that you think is better on the list then let me know. I'm really more insterested in finding out what kind of Standalone to run. Sam |
Not to be a wet blanket or anything but I wouldpersonally suggest NOT getting the Gilmer Drive for you rx. I have it and am not happy at all with it. It will skip off the waterpump gear at anything passed 6k. So now i have to get the relocation kit from pineapple racing with a new belt from miguires bearings to fix the problem. The kit to me is just not worth the extra money. If i were you i would just get the relocation kit for the 69.00 and a longer belt. You will not have any slippage due to the increase in surface contact not to mention moving the weight of the alt. down and you save a butt load of cash for something cooler, like getting a good breather tank with silicon hosing...
|
Sorry, one more thing. A EGT system is in my opinion, better. It allows for the balancing of both rotors (important for boosted motors) and it is a early warning system for a leaning condition in comparision to O2 which wouldn't know if one rotor is leaning out or not since it takes the average of the two. Besides EGT is cheaper.
|
Originally Posted by zeroecco' post='862654' date='Mar 8 2007, 08:58 AM
Sorry, one more thing. A EGT system is in my opinion, better. It allows for the balancing of both rotors (important for boosted motors) and it is a early warning system for a leaning condition in comparision to O2 which wouldn't know if one rotor is leaning out or not since it takes the average of the two. Besides EGT is cheaper. Hey, Thanks for the info, If I can do both simeltaniusly i will do that. I have looked at the pineapple racing one, which has both front and rear on there in a single guage (saves a little more room). Also about the gilmer drive, where abouts did you purchase yours? I was looking from the tweak it site. I could really use it for supercharger setup. Thats the main reason that i wanted it. I've never head anything about it slipping above 6k before though? Why didn't you do a custom belt tensioner as highlighted in attached picture. The setup that I'm thinking about looks like this the other picture attached. |
Originally Posted by dj55b' post='862677' date='Mar 8 2007, 10:50 AM
Hey, Thanks for the info, If I can do both simeltaniusly i will do that. I have looked at the pineapple racing one, which has both front and rear on there in a single guage (saves a little more room). Also about the gilmer drive, where abouts did you purchase yours? I was looking from the tweak it site. I could really use it for supercharger setup. Thats the main reason that i wanted it. I've never head anything about it slipping above 6k before though? Why didn't you do a custom belt tensioner as highlighted in attached picture. The setup that I'm thinking about looks like this the other picture attached. |
All times are GMT -5. The time now is 02:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands