1st Generation Specific 1979-1985 Discussion

Messed up timing.

Old Aug 22, 2006 | 06:08 PM
  #1  
12A GSL's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2006
Posts: 12
Default

I went outside today, to start and run my car. After starting it up, it had a constant miss every 3 seconds. I went and got my timing light, and my gsl's timing was majorly off. I am curious as to what could have caused a major bump in the timing. Is this something serious?
Old Aug 22, 2006 | 06:40 PM
  #2  
12A GSL's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2006
Posts: 12
Default

Originally Posted by 12A GSL' post='833761' date='Aug 22 2006, 03:08 PM

I went outside today, to start and run my car. After starting it up, it had a constant miss every 3 seconds. I went and got my timing light, and my gsl's timing was majorly off. I am curious as to what could have caused a major bump in the timing. Is this something serious?






Update, The timing is fine, I was just looking at the timing light during the day. The car misses constantly now, and smoking out of the tail pipe. It looks like oil, its a greyish blue color. I dont know if its the carberator or the engine.
Old Aug 22, 2006 | 08:53 PM
  #3  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

pull a spark plug. i still havent seen a bad carb in one of these, unless its sat forever
Old Aug 23, 2006 | 04:41 PM
  #4  
12A GSL's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2006
Posts: 12
Default

I am going to buy new spark plugs this weeknd. I dont get paid untill saturday. Any reccomendations on a certain brand. I am not looking for racing spark plugs or anything like that, im just looking for average spark-plugs. My budget is very tight.



EDIT REASON= I had to add my budget question.
Old Aug 23, 2006 | 09:56 PM
  #5  
Kentetsu's Avatar
Member
 
Joined: Mar 2006
Posts: 87
From: Grand Rapids, Michigan
Default

Use only NGK spark plugs. Trust me on this one... Take a good look at your cap/rotor while you are at it, and make sure your plug wires are in good shape.
Old Aug 24, 2006 | 04:41 PM
  #6  
12A GSL's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2006
Posts: 12
Default

I took a look at the product, I will order them this weeknd. I am favoring that product now, because of the inside "Solid Copper". Most are aluminum and other cheap materials, and I am big on Electronics. Thankyou for the reccomendation "Kentetsu".
Old Aug 27, 2006 | 09:37 PM
  #7  
BeaterRX7's Avatar
Senior Member
 
Joined: May 2005
Posts: 178
From: Choctaw, OK
Default

Originally Posted by 12A GSL' post='834173' date='Aug 24 2006, 04:41 PM

I took a look at the product, I will order them this weeknd. I am favoring that product now, because of the inside "Solid Copper". Most are aluminum and other cheap materials, and I am big on Electronics. Thankyou for the reccomendation "Kentetsu".
I use either NGK or Nippondenso. They're pretty much the same. My car misfired pretty regularly with the stock ignition, and I cured it by going MSD. YMMV.



With the blue smoke and regular misfire, I would be inclined to suspect a blown side seal in the motor. If so, you can probably score a good motor at your local Pull-A-Part style yard.
Old Sep 7, 2006 | 01:22 PM
  #8  
ratboy's Avatar
Junior Member
 
Joined: Nov 2005
Posts: 5
Default

You may want to confirm you have a spark on all plugs while you are at it. You may have lost your leading ignitor and would result in only your trailing plugs firing. It will run like crap, blow lots of unburned gas and the engine looks like it wants to jump out of the car...



-Erik
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kindahusky
2nd Generation Specific
4
Jul 21, 2011 08:57 AM
Racer X
Insert BS here
11
Aug 1, 2003 10:28 AM
ROTARYROCKET7
2nd Generation Specific
16
Jun 24, 2003 01:00 AM
phinsup
Insert BS here
4
Oct 2, 2002 04:54 PM
ILUVMY88CABRIO
Insert BS here
7
Apr 29, 2002 08:28 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:26 PM.