Intake
06-23-2004, 01:52 PM
#5
Senior Member
Join Date: Jun 2002
Location: Arkansas
Posts: 254
Heres mine...settin on top of the reworked nikki...that black hose runs down...goes thru a hole in the shielding...then hooks into the airdam thing...bumper...whatever you want to call it...
it's my 5 dollar ram air mod
oh...plus all the holes drilled in the breather cover...those help out quite a bit
it's my 5 dollar ram air mod
oh...plus all the holes drilled in the breather cover...those help out quite a bit
06-23-2004, 08:27 PM
#7
Senior Member
Join Date: Jun 2002
Location: PA
Posts: 354
was gonna post pics, but you have a 12a car so it wouldn't really help. falcoln0014 has a good setup for you. Another idea is to cut a hole in the sheet metal shroud that the radiator mounts to and route your hose through there under the nosepiece/in front of the radiator so you're sucking cold air. The 13b cars already have the hole cut.
06-24-2004, 01:20 PM
#8
Senior Member
Thread Starter
Join Date: May 2004
Location: Minnesota!
Posts: 452
i saw a pic of someones car with the shrout off, can i take that off?? does its have a better affect? see i got a new radiator resentally and my clutch is all bent from the accident and my light comes up as over heat exhaust system sometimes or add coolent.. and i want to see if i can maybe get something working there, maybe try to bend it back ?? its possible i think and it could work but i need some expert advise!!
i still want an e-fan tho
i still want an e-fan tho
06-25-2004, 07:45 PM
#9
Senior Member
Join Date: Oct 2003
Location: I don't really exist ...
Posts: 500
i have tried several setups as far as intakes are concerned. i have tried RB and K&N and modified stock. personally, i haven't seen a difference, btu then again ... i have yet to dyno my car.
what are your goals?
what are your goals?
06-25-2004, 09:02 PM
#10
Senior Member
Join Date: Jun 2002
Location: Arkansas
Posts: 254
I've got the rest of my intake setup laying on the floor right now...and after I figure out how im going to mount it...when its light again...i'll get some good pictures and post em up...i was having trouble finding something to use for an intake...and i stumbled upon some 6" to 3" stove pipe...that sewage pipe mounts perfect over it...and a PVC 3" T pipe...sort of
like I said...i'll put pictures of the setup on here providing I can get it to work...and I think I can...not sure tho...i've got several air box lids around...and I'm thinking a ram-air setup might work better without the holes drilled in the lid...but...if its pushing air into the breather the holes might be a good thing...so it doesn't push too much...like a passive blow-off or something...i dunno...guess it'll take some experimentation...as always
like I said...i'll put pictures of the setup on here providing I can get it to work...and I think I can...not sure tho...i've got several air box lids around...and I'm thinking a ram-air setup might work better without the holes drilled in the lid...but...if its pushing air into the breather the holes might be a good thing...so it doesn't push too much...like a passive blow-off or something...i dunno...guess it'll take some experimentation...as always