Can someone post some pictures of there Intake set up???

As in what? Do you want to see what intake manifolds we have and to compare, or do you want to see what air filters we are using? Please be more specific.



Ian



PARTS FOR SALE CHECK F/S SECTION

grab one big picture i want to see it all the hole set up, manifolders air filer everything https://www.nopistons.com/forums/pub...DIR#>/wink.png!

manifolds********************************8

Heres mine...settin on top of the reworked nikki...that black hose runs down...goes thru a hole in the shielding...then hooks into the airdam thing...bumper...whatever you want to call it...



it's my 5 dollar ram air mod https://www.nopistons.com/forums/pub...#>/biggrin.png



oh...plus all the holes drilled in the breather cover...those help out quite a bit

dude thats awesome man! ill do that https://www.nopistons.com/forums/pub...DIR#>/wink.png thanks alot!!

was gonna post pics, but you have a 12a car so it wouldn't really help. falcoln0014 has a good setup for you. Another idea is to cut a hole in the sheet metal shroud that the radiator mounts to and route your hose through there under the nosepiece/in front of the radiator so you're sucking cold air. The 13b cars already have the hole cut.

i saw a pic of someones car with the shrout off, can i take that off?? does its have a better affect? see i got a new radiator resentally and my clutch is all bent from the accident and my light comes up as over heat exhaust system sometimes or add coolent.. and i want to see if i can maybe get something working there, maybe try to bend it back ?? https://www.nopistons.com/forums/pub...DIR#>/wink.png its possible i think and it could work but i need some expert advise!!



i still want an e-fan tho

i have tried several setups as far as intakes are concerned. i have tried RB and K&N and modified stock. personally, i haven't seen a difference, btu then again ... i have yet to dyno my car.



what are your goals?

I've got the rest of my intake setup laying on the floor right now...and after I figure out how im going to mount it...when its light again...i'll get some good pictures and post em up...i was having trouble finding something to use for an intake...and i stumbled upon some 6" to 3" stove pipe...that sewage pipe mounts perfect over it...and a PVC 3" T pipe...sort of



like I said...i'll put pictures of the setup on here providing I can get it to work...and I think I can...not sure tho...i've got several air box lids around...and I'm thinking a ram-air setup might work better without the holes drilled in the lid...but...if its pushing air into the breather the holes might be a good thing...so it doesn't push too much...like a passive blow-off or something...i dunno...guess it'll take some experimentation...as always https://www.nopistons.com/forums/pub...#>/biggrin.png