1st Generation Specific 1979-1985 Discussion

I Need Help Please

Old Jan 21, 2003 | 04:26 PM
  #1  
812Little's Avatar
Thread Starter
Member
 
Joined: Sep 2002
Posts: 45
Thumbs down

I consider myself a considerable problem solver, and I think I can fix it my self I just need some direction.



I have an '84 RX7, manual, 1.1L that wont start. It will turn over. I sprayed ether in the carb and still no fire. I put DeIcer in the fuel tank, thinking that the lines were frozen. Could the starter be bad? Is it in the plugs and ignition? How do I test for these things? Or is in the fuel? New fuel pump?



Please help. I need my car running by friday.
Old Jan 21, 2003 | 04:31 PM
  #2  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

are you getting spark? does the fuel pump run? it needs air, fuel, and spark to run, so start eliminating stuff



mike
Old Jan 21, 2003 | 04:37 PM
  #3  
812Little's Avatar
Thread Starter
Member
 
Joined: Sep 2002
Posts: 45
Default

How do I test for each of these?

Thanks for the quick response.
Old Jan 21, 2003 | 04:38 PM
  #4  
812Little's Avatar
Thread Starter
Member
 
Joined: Sep 2002
Posts: 45
Default

Oh, its getting air.
Old Jan 21, 2003 | 04:46 PM
  #5  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

well go check spark, and see what happens



mike
Old Jan 21, 2003 | 06:30 PM
  #6  
812Little's Avatar
Thread Starter
Member
 
Joined: Sep 2002
Posts: 45
Default

I have spark coming from the wires, the fuel pump is kicking on (I think I can hear it), but I took out a spark plug it doesnt look like a normal plug. Are there any differences? I took some pictures how do i post them?
Old Jan 21, 2003 | 06:38 PM
  #7  
812Little's Avatar
Thread Starter
Member
 
Joined: Sep 2002
Posts: 45
Default

http://www.webphotos.com/list_photos_edit....&smi=1&a=100813



I think this will work? Here is a few pictures tell me what you all think.
Old Jan 21, 2003 | 09:36 PM
  #8  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

i think it might be flooded, clean off the plugs and put em back. the pics didnt work



mike
Old Jan 21, 2003 | 10:21 PM
  #9  
812Little's Avatar
Thread Starter
Member
 
Joined: Sep 2002
Posts: 45
Default

I think it could be flooded, the plugs smell real strong and have a bit of moisture on them.





Here is a link that might work, so you can tell me (anyone) if they seem ok. The gap looks different than the rest of plugs I have seen.



http://www.villagephotos.com/pubbrowse.asp...selected=143846
Old Jan 21, 2003 | 10:27 PM
  #10  
Racer X's Avatar
Senior Member
 
Joined: Sep 2002
Posts: 5,542
From: Vanderhoof,BC(Canada)
Default

Sounds like its flooded.You need to burn off the excess gas(A lighter works good).Put the plugs in and pull the pump fuse out.Then crank it over a few times till it sounds like it wants to fire then burn the extra gas off and repeat till the engine starts with the fuse out still.Once the gas in the engine is burnt then put the fuse back in and start the car as normal.Hope this helps you out.



~Luis

Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:58 AM.