NoPistons -Mazda Rx7 & Rx8 Rotary Forum
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   1st Generation Specific (https://www.nopistons.com/1st-generation-specific-16/)
-   -   Engine Bay Harness's ? (https://www.nopistons.com/1st-generation-specific-16/engine-bay-harnesss-16440/)

Smog Fighter 04-28-2003 09:37 PM
1 Attachment(s)
Last one

Smog Fighter 04-28-2003 09:38 PM
hope that helps.



Raul

Directfreak 04-29-2003 09:04 AM
On the SE, everything from the Passenger's Side wiring harness is from the engine and ECU only. The gauges, senders, etc, are all from the Driver's side, and wrap around to the passanger' side through the front.



If you are going to use a complete TII drivetrain, with ECU, remove the SE one first.

Racer X 04-29-2003 02:03 PM
Yeah that help alot.Thanks Raul.So Directfreak the engine crap is all controlled off the passenger side then?I can pull the harness' out and tuck away for now and run the T2 harness' thru the opening then?Thanks



Luis

Directfreak 04-29-2003 06:24 PM
Originally Posted by Racer X' date='Apr 29 2003, 07:03 PM
Yeah that help alot.Thanks Raul.So Directfreak the engine crap is all controlled off the passenger side then?I can pull the harness' out and tuck away for now and run the T2 harness' thru the opening then?Thanks



Luis
yep

Racer X 05-01-2003 03:53 AM
Do I leave the smaller one disconnected too?Its called a joint connector in the manual so I'm not sure on that harness.

Racer X 05-01-2003 05:06 PM
Originally Posted by Racer X' date='May 1 2003, 12:53 AM
Do I leave the smaller one disconnected too?Its called a joint connector in the manual so I'm not sure on that harness.
It ties into the main bay harness so do I leave it then?

j9fd3s 05-01-2003 05:24 PM
i dont think so, try it. it'll either work or it wont



mike


All times are GMT -5. The time now is 05:49 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands