I have FI now and one of the injecteros are leaking.....I was thinking of going to a weber side draft set up or is the down draft better or should I stick the FI?

the efi is pretty nice on these, its very simple and works great



mike

ya...your right it's very easy to work w/. I just put in new o-rings and grommets on it and looks like one injector is bad (leaking) . It is moist in between the placstic top cap and the body of the injector, looks like thats were it is leaking. Know any were to get injectors for a good price?

Try the parts trader.Someone is always wrecking a SE. https://www.nopistons.com/forums/pub..._DIR#>/sad.png

i'd be thinking about greddy 720cc injectors they are $125 each



mike

Greddy huh!.....I'll take a look into that. Thanks..... oh were can I buy?

go to greddy.com and look for a dealer. I just put 720cc injectors in my 85 se

Hows the idle?I know they arent that much bigger than the stockers.

What CC is the stock injectors anyway, does it idle ok and does the ECU read the injectors ok? And what is the real advantange going w/ a bigger injector if your running stock.

the stock injectors are supposed to be 680cc low impedance, they seem to test more like 700+ though. the greddy ones are 720cc also low impedance, and basically they are about half the cost of the factory gsl-se injectors. if you're running stock, sock is fine, but i have a header on mine and it runs out of fuel at high rpms



mike