1st Generation Specific 1979-1985 Discussion

1985 Rx7 13b Efi Wild, Irregular Idle

Thread Tools
 
Search this Thread
 
Old Jul 27, 2003 | 03:36 PM
  #1  
terrelw1's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2003
Posts: 1
Default

My wife and I own a 1985 White GSL-SE RX7, 13B, EFI...It has developed an irregular, pulsating high idle. It normally idles around 800 rpm. Out of the blue it will run up to about 2500 rpm, idling roughly. It will also pulse sometimes between approx 1500 rpm to 2500 rpm. The only way we can get it to drop to a normal idle is to rev it high. Then it will drop down to normal idle speeds. Pushing in the clutch seems to have no effect. Turning off the engine and restarting usually has no effect. When then engine runs like this, there is usually a backfire or two at the muffler. Anyone have some advice?





Thanks,





Terrel
Old Jul 27, 2003 | 04:02 PM
  #2  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

sounds like the throttle sticking open, they like to carbon up. next time its does it open the hood and try to push the throttle closed manually. if that fixes it you need to pull the throttle body off and clean it with carb cleaner.



mike
Old Jul 27, 2003 | 05:11 PM
  #3  
manntis's Avatar
Member
 
Joined: Aug 2002
Posts: 63
Default

when mine did that, there were two things going on...



the ports had caked up with crap over the years. Cleaning them did wonders.



The solenoid mounted on the firewall which helped regulate the idle at 800 rpm was crap. I swapped it for a newer used one and the engine purred like a high-horsepower kitten.
Old Jul 27, 2003 | 05:31 PM
  #4  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

Originally Posted by manntis' date='Jul 27 2003, 02:11 PM
when mine did that, there were two things going on...



the ports had caked up with crap over the years. Cleaning them did wonders.



The solenoid mounted on the firewall which helped regulate the idle at 800 rpm was crap. I swapped it for a newer used one and the engine purred like a high-horsepower kitten.
hmm yeah the vent and vac solenoids can go bad too, ive jsut never had it happen to me so i skip it.



mike
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
worthyking
1st Generation Specific
1
Apr 14, 2009 09:55 AM
jonfc3s
RX-7 & RX-8 For Sale
0
Jul 22, 2008 10:21 AM
Dev
2nd Generation Specific
5
May 29, 2006 04:57 PM
herman
Rotary Engine Swaps
7
Oct 16, 2002 09:27 AM
7Sweety
Insert BS here
87
Oct 7, 2002 04:34 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 06:21 AM.