goodwin74

i'm thinking of purchasing these off ebay. tell me what you think. would these be a problem to mount on my gtu? also, what size tires should i go with if i get these? thanks alot.



http://cgi.ebay.com/ebaymotors/ws/eBayISAP...7976119532&rd=1

just-some-guy

the rims will fit.



8" width with a 38mm offset will fit without any problems.



typically on FC3S, if it's a staggered look, the x8" in the front will be a 38mm and the x9" in the rear will be a 35mm. this 3mm offset difference allows the lip/dish on both the front and rear to be the same size, despite the difference in actual wheel width.



as for tires sizes. i'm not sure..but my guess would be 235? maybe 245 in the rear?

drftk1d

may have to roll fenders.



i think those would look sick on a FC.

jackboots

sick as in eww gross.

89 Rag

Come on, they aren't bad at all.



225/40's are the size tires I would run.

goodwin74

Well,



I'm not big with all the new styles and latest style of rims. i really like the rims due to the big lip and the design. So there's really no need for negativity. This is what i like and that's what i'm going to get>

drunkin_idiot

I like them alot, mebe I have bad taste, but who gives a ****, STFU JACK!!!!

jK i <3 YOU.

drftk1d

with the 18x9 you can run wider than 225, maybe 235 or 245.

89 Rag

[quote name='drftk1d' date='May 23 2005, 10:05 PM']with the 18x9 you can run wider than 225, maybe 235 or 245.


[/quote]



Doesn't that have ill effects on the handling aspects, running a wider wheel and tire in the rear?

goodwin74

Well, i understand the aspects of handling but i just thought the rims would look pretty cool with widebody fenders that i had my eyes on. i really dont think that i want to go with an entire kit so i chose to get the fenders only. but then i thought about the rims so when i ran across these on ebay, i thought that extra wide lip would look great with my plans.