Suspension, Wheels, Brakes, Tires Power to the ground starts here.

17x9s

Old Mar 22, 2009 | 08:59 PM
  #1  
kittay's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2008
Posts: 6
Default

For anyone running 9 wides front/ back (on an FC) any issues with rubbing?

I have a set of 17x9s with 255 wides and was thinking of throwing them on, but wasn't sure if anything needed trimmed. I do not have coilovers at this time, so if anyone has had experience, input would be greatly appreciated!
Old Sep 30, 2010 | 08:46 PM
  #2  
Maxt's Avatar
Senior Member
 
Joined: Feb 2003
Posts: 564
From: Calgary
Default

17x8's is needed for the front, or you have to run wide fenders. 17x9 on the rear is no problem if the offset is right, if the offset is a little off you have to watch what tire you run, and get rid of the rear steer bushings for solids so the the tires dont rub on the trailing arms during heavy cornering.

I am running 265's on the rear of one car, and 275's on the rear of the other. The 265's are a dunlop spec racing tire so they are actually a little wider than the 275 hankook.
Old Oct 1, 2010 | 08:00 AM
  #3  
Baldy's Avatar
Super Moderator
 
Joined: Sep 2002
Posts: 5,425
From: Tallahassee, FL
Default

I have the 17x8 Mustang GT wheels, with 245 tires, and they rubbed in the front, slightly. I folded up that lip of the fender, and they cleared fine.
Old Feb 10, 2011 | 04:11 PM
  #4  
lamar-'s Avatar
Member
 
Joined: Oct 2007
Posts: 34
Default

Damn17x8's rub I was lookinag at 17x9 fronts 17x10.5 rears lol
Old Feb 11, 2011 | 08:05 AM
  #5  
Baldy's Avatar
Super Moderator
 
Joined: Sep 2002
Posts: 5,425
From: Tallahassee, FL
Default

245 tires rub, I'm sure you could use a 9" wheel with 245 (or possibly even smaller) width tires.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:43 AM.