2nd Generation Specific 1986-1992 Discussion

Electric fan options

Thread Tools
 
Search this Thread
 
Old Dec 9, 2007 | 03:27 PM
  #1  
Rob x-7's Avatar
Thread Starter
Super Moderator
 
Joined: Feb 2002
Posts: 12,288
From: Amityville, New York
Default

anyone running a electric fan with a FMIC AND AC?



I really want to clean up the bay and run a nice shrouded electric fan in my car, but im worried it wont suck

enough air through the FMIC, AC condensor, and the Koyo radiator?



anyone with real world expierence?



I have done some reading around it seems that the stock fan just might be best.

I know I have always given the advice that the stock fan with a properly operating cooling system is all you need, but

that was for NA cars.
Old Dec 9, 2007 | 04:44 PM
  #2  
teknics's Avatar
Senior Member
 
Joined: Dec 2002
Posts: 4,837
From: Wayne, NJ
Default

stock fan, or get the black magic fan i have 3,300cfm, but you may need to have someone modify the koyo's necks to fit the fan and shroud onto the readiator (i needed 2" extension on my fluidyne before my fluidyne crapped out)
Old Dec 9, 2007 | 06:00 PM
  #3  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

the tarus fan assembly almost bolts right on and moves a ton of air
Old Dec 9, 2007 | 06:12 PM
  #4  
ColinRX7's Avatar
Senior Member
 
Joined: Oct 2003
Posts: 3,502
From: Canada
Default

I'd buy an electric fan, and just build a shroud. You got good fabrication skills, you could make something pull good air.



Hows the radiator though? Condensor, and FMIC? All new I'm assuming? Fins aren't clogged or bent on anything... No reason you wouldn't be able to keep the car cool with a generic fan pulling air through an proper shroud.
Old Dec 9, 2007 | 06:35 PM
  #5  
Jims5543's Avatar
Senior Member
 
Joined: Dec 2001
Posts: 2,934
From: Jensen Beach, FL / Sylva, NC
Default

Nothing beats the OEM setup period.



Due to me wanting to keep my FD engine complete without swapping other parts on I went electric, I have the Be Cool duel 11" electric fans from Summit. They are pricey, and you have to build your own circuit to handle the amp draw but they work great.



I run a FMIC and A/C in Florida problem free.
Old Dec 9, 2007 | 09:46 PM
  #6  
Rob x-7's Avatar
Thread Starter
Super Moderator
 
Joined: Feb 2002
Posts: 12,288
From: Amityville, New York
Default

no bent fins, im going to just run the stock set up and see what happens.



I would not buy a junk yard fan and put it in my car, and that taurus fan spikes at 40 amps, thats alot of draw!



I remember Jim getting a fan set up, if it works in florida it will work in New York
Old Dec 10, 2007 | 04:02 AM
  #7  
RX7 13B 4 UR AZZ's Avatar
Senior Member
 
Joined: Feb 2003
Posts: 1,591
From: Miami, Florida
Default

I dont remember where me and my friend bought it but it is an E-fan with an aluminum shroud that we bought pre made i think it was like $115 came pre drilled and everything made specifically for an RX-7. when we did the turbo swap on his car before the V8 swap it cooled the engine perfect and i am in miami and this was during the summer time. only after a few hard runs would the temp go up a bit mabey 190-200 max we ever saw it go up and that was after like 5 continuous light to light runs as soon as we pulled over temps came down in no time mabey 2 min. all the while temps where 180 +-1
Old Dec 10, 2007 | 08:20 AM
  #8  
Rob x-7's Avatar
Thread Starter
Super Moderator
 
Joined: Feb 2002
Posts: 12,288
From: Amityville, New York
Default

sneedspeed sells a fan and shroud that is FC specific, the fan is only 2100cfm though, wonder if thats enough



Old Dec 10, 2007 | 10:27 AM
  #9  
miltstheman's Avatar
Senior Member
 
Joined: Jul 2003
Posts: 153
From: The fine state of Denial...
Default

It's not, get the 3300cfm Black Magic fan mentioned above. I have that one on my car with A/C and a dual-pass Koyo, it moves a ton of air and is QUIET too. I did have to modify the shroud to make it fit perfect though. You can kind of see how it fits in the pic. You can also see the edge of the blade itself too because I didn't get the shroud cut as perfect as I would have liked...



Name:  cars2006.jpg
Views: 793
Size:  134.2 KB
Old Dec 10, 2007 | 11:05 AM
  #10  
Rob x-7's Avatar
Thread Starter
Super Moderator
 
Joined: Feb 2002
Posts: 12,288
From: Amityville, New York
Default

black magic a summit item I assume?



milt- I see ac in your car, so I assume you use it or is it just there?





nice engine bay btw!



All times are GMT -5. The time now is 03:49 PM.