TD-06SH 25G-16.0 VS TD-07S 25G-17.0



Just needed a really quick answer to which on of these turbos will be better for the street..and how much horsepower each of them can produce at about 15 psi the most..its for a 90 turbo rx7.



thanks..

the tdo6 is slightly smaller than the td07, as if you did not know. i know that my my friends' td07 is very laggy and big......he does not drive it on the street.......try to pm dragon....he is very knowledgeable about the different turbos, and might have some more input than simply...ONE IS BIGGER....





lou

the number of power you can talk about is only the power that particular turbo can support, or can flow... Td06-25G can flow about 600-650 horses, and the td07-25g is about 700-800 horsepower. they both produces enough cfm to make enough power you can handle on the street, it will be up to your engine management system and the fuel system to determine what they can make on your car.

RE-Amemiya highly recommands the TD06-25G on a mild ported 13B turbo engine. It has okay response, good for the track, and not bad for the street. Td07-25G on the other hand will be more of a drag style turbo. the response will be close to a T78 from Greddy on your car 90T2.

The T78 for what I understand is a hybrid improment of TD07 turbo, so it will be quite similar.

350hp at the wheels should be quite resonable @15psi on a ported 13B-T engine with the TD06-25G set up. https://www.nopistons.com/forums/pub...closedeyes.gif

thanks... https://www.nopistons.com/forums/pub...DIR#>/cool.png

onboost- kind of on topic.... here is a pic of my 25g-TD07 but I am a little confused what turbine housing it has on it. By looking at the pic can you tell me if it's a 14cm or a 17cm housing?

Setzep.That pic does not fully show the turbo but its really to hard to tell from pics of the size anyways.I still love that turbo you have tho. https://www.nopistons.com/forums/pub...1047683827.gif

Well I learned something today. I thought both of those were pretty small turbos https://www.nopistons.com/forums/pub...1047683473.gif

Should be able to tell what housing it is just by looking at the "double hump" style of the mitsu turbine housing.

Thanks for the complement https://www.nopistons.com/forums/pub...IR#>/smile.png

generally speaking is the apex rx6 turbo similar in terms of spooling and turbo output as the td06-25g mitsu?