T04's
#11
Looking at this it seems the B will bolt up.Not 100% sure tho.
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...&category=33742
Good price for new anywayd.
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...&category=33742
Good price for new anywayd.
#13
Originally Posted by 1Revvin7' date='Aug 17 2003, 08:18 PM
Where's dragon when you need him...
#15
Hmm.... that ebay turbo seller says it has a "60" compressor but he shows a compressor map for a H-3 compressor. Probably means a .60 a/r compressor housing. I woulden't put a H-3 compressor on my 13b. That turbine housing looks nice though
#16
Originally Posted by setzep' date='Aug 18 2003, 01:21 PM
Hmm.... that ebay turbo seller says it has a "60" compressor but he shows a compressor map for a H-3 compressor. Probably means a .60 a/r compressor housing. I woulden't put a H-3 compressor on my 13b. That turbine housing looks nice though
#17
Originally Posted by Racer X' date='Aug 18 2003, 12:18 AM
I think the standard wastegate off the HKS site is the one but not 100% sure.Anyone?
oh, and the turbo will have to be slotted a little too.
aaaand you might have to make a spacer for it in order for the turbine housing to clear the LIM.
have fun
#18
Originally Posted by spoolin' date='Aug 18 2003, 08:47 PM
HKS racing wastegate (50mm w/ rectangle flange) is what fits it......after you modify the flange so the holes will line up with the wastegates.
oh, and the turbo will have to be slotted a little too.
aaaand you might have to make a spacer for it in order for the turbine housing to clear the LIM.
have fun
oh, and the turbo will have to be slotted a little too.
aaaand you might have to make a spacer for it in order for the turbine housing to clear the LIM.
have fun
#19
A T4 flange is the size of the flange for a TO4 series turbo and it will fit all of them be it a To4b, e, s, r or even the T series turbo's from Turbonetics like the T66, T70, T76 etc... It will also fit the mitsubishi TD07 series turbos as well. your only problem with a larger turbo is that when you get in to the larger compressors IE. .84 a/r they might not clear the intake manifold etc, but that manifold should work fine with any thing up to a a/r .70 no problem..