Need Some Help Getting Single Turbo Project Setup
#1
Alright heres what i have 1990 turbo rx7
installed on car
------------------
intake
rb turbo back
20b fuel pump
act racing clutch
parts waiting to get installed
------------------
avc-r
egt/fuel/oil/temp,oil temp/boost gauge(all greddy gauges)
ts04 turbo with hks ss divided manifold/hks 50 mm wastegate
greddy 3 row fmic
w/b 02
besides injectors(550/1600cc setup),ems(not sure what ems yet) am i missing anything else?
IM doing the project myself..i have mechanical experience and a friend who works on rotaries
(im oonly going to run 10psi for the time being till i get suspension setup,and till i increase tuning skills)...not trying to win the gt500 or anything.
Im also getting a new rebuilt engine from cpracing,what extra mods should i ask for besides the basic rebuild? on there list i can just think of s/p, water jacket mod,race bearing,3rd gen stationary gears..im planning to spend a good 5000
we only have 1 oil pressure regulator on our cars correct?i was thinking of getting one from racing beat,but cpracing seems to offer one as well they the same things?
forgot to mention only want 500hp to the crank, only planning on 400rwhp the most.
Thanks..project should get started in a month or 2,just want to make sure i wont be waiting for parts...
installed on car
------------------
intake
rb turbo back
20b fuel pump
act racing clutch
parts waiting to get installed
------------------
avc-r
egt/fuel/oil/temp,oil temp/boost gauge(all greddy gauges)
ts04 turbo with hks ss divided manifold/hks 50 mm wastegate
greddy 3 row fmic
w/b 02
besides injectors(550/1600cc setup),ems(not sure what ems yet) am i missing anything else?
IM doing the project myself..i have mechanical experience and a friend who works on rotaries
(im oonly going to run 10psi for the time being till i get suspension setup,and till i increase tuning skills)...not trying to win the gt500 or anything.
Im also getting a new rebuilt engine from cpracing,what extra mods should i ask for besides the basic rebuild? on there list i can just think of s/p, water jacket mod,race bearing,3rd gen stationary gears..im planning to spend a good 5000
we only have 1 oil pressure regulator on our cars correct?i was thinking of getting one from racing beat,but cpracing seems to offer one as well they the same things?
forgot to mention only want 500hp to the crank, only planning on 400rwhp the most.
Thanks..project should get started in a month or 2,just want to make sure i wont be waiting for parts...
#2
where did you get the HKS ss divided manifold? do u have a pic?
you are going to need a custom made downpipe for your setup. Brand new clutch that will hold your power/torque with T04S. If you are using the 13BT block from a 1990 rx-7, find a FD flywheel, it is straight bolt on, trust me you'll like it. They go for around free to 75 USD if you look around.
you are going to need a custom made downpipe for your setup. Brand new clutch that will hold your power/torque with T04S. If you are using the 13BT block from a 1990 rx-7, find a FD flywheel, it is straight bolt on, trust me you'll like it. They go for around free to 75 USD if you look around.
#3
got the whole turbo setup off dragon, have to pick it up from postoffice still then i'll take pics.I do have the act racing clutch,i'll see how it does..I"ll look into the fd flywheel..I guess from your response i do have pretty much everything, which is good 2 know..
Thanks
Thanks
#5
Originally Posted by rotary914' date='Jan 12 2004, 02:11 AM
Is your exhaust manifold anything like this one?
(see attached pic)
(see attached pic)
I'll get pics for u guys by end of the week..
Thread
Thread Starter
Forum
Replies
Last Post
9Second7
RX-7 & RX-8 Parts For Sale & Wanted
12
07-02-2003 04:44 PM
scotchjc
Single Turbo Discussion
1
03-27-2003 08:32 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)