Single Turbo Discussion Area for discussing single turbo RX-7's.

My Proposed Turbo Set Up

Old 06-29-2005, 03:00 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Jul 2003
Location: Deltona, Florida
Posts: 293
Default

Heres the deal I own an 82 fb. 12a street port with low miles I wana run a blow through turbo set up or carbuerated turbo. I already have a R.B. intake a 600cfm holley singel feeed holley red pump full R.B. exghaust which I'm pretty sure I wont need any more. I got a tight tranny out of a gsl-se act clutch and a gsl rear with gsl-se guts. I want to run mid to low 13's. I think thats being pretty conservative. The turbo that I have is a stock turbo II turbo which is in good shape no play in or out on the impellers. I found a 12a turbo manifold but I havent bought it yet? I'm trying to do this as cost effective as possible. butI wanna do it right. I'd really like to hear from the dude from rotary shacki know he kicks aroud this fourm. ok so heres my list of questions.



1) What cfm carb should I use and jet sizes

2) What intercooler should I use

3) I'm assuming singel 3" exghaust

4) fuel pump how many psi

5) reccomended blow of valve if nessisary

6) Locked dizzy how hard is it to modify
bigboi12A is offline  
Old 06-29-2005, 03:07 PM
  #2  
Member
 
Join Date: Nov 2004
Posts: 71
Default

[quote name='bigboi12A' date='Jun 29 2005, 12:00 PM']Heres the deal I own an 82 fb. 12a street port with low miles I wana run a blow through turbo set up or carbuerated turbo. I already have a R.B. intake a 600cfm holley singel feeed holley red pump full R.B. exghaust which I'm pretty sure I wont need any more. I got a tight tranny out of a gsl-se act clutch and a gsl rear with gsl-se guts. I want to run mid to low 13's. I think thats being pretty conservative. The turbo that I have is a stock turbo II turbo which is in good shape no play in or out on the impellers. I found a 12a turbo manifold but I havent bought it yet? I'm trying to do this as cost effective as possible. butI wanna do it right. I'd really like to hear from the dude from rotary shacki know he kicks aroud this fourm. ok so heres my list of questions.



1) What cfm carb should I use and jet sizes

2) What intercooler should I use

3) I'm assuming singel 3" exghaust

4) fuel pump how many psi

5) reccomended blow of valve if nessisary

6) Locked dizzy how hard is it to modify

[snapback]732153[/snapback]

[/quote]





i am building a blow through, here is a pic
scottystraub is offline  
Old 07-01-2005, 05:08 PM
  #3  
Senior Member
Thread Starter
 
Join Date: Jul 2003
Location: Deltona, Florida
Posts: 293
Default

if thats your set up tell me alittle about it. anybody else,,,, im reachin here educate me
bigboi12A is offline  
Old 07-01-2005, 10:42 PM
  #4  
Member
 
Join Date: Nov 2004
Posts: 71
Default

1) What cfm carb should I use and jet sizes

600 or 650 should be plenty, your going to have to jet it, get a o2 meter also

2) What intercooler should I use

i am running 10 psi no intercooler

3) I'm assuming singel 3" exghaust

i have a 3 1/2 dump pipe out the turbo

4) fuel pump how many psi

with a carb if blow through you will need 5 to 7 psi and add pressure with boost 1 to 1 ratio, fuel pressure need to be higher than boost

5) reccomended blow of valve if nessisary

none here

6) Locked dizzy how hard is it to modify

locked out by welding the weights shut





hope that helps
scottystraub is offline  
Old 07-02-2005, 08:44 AM
  #5  
Senior Member
Thread Starter
 
Join Date: Jul 2003
Location: Deltona, Florida
Posts: 293
Default

hey man thanks alot r u running a 12a or 13b is it ported. not sure if follow on the fuel psi thing your saying i need as mutch psi of fuel to match my boost correct. how mutch hp do you have with that set up?
bigboi12A is offline  
Old 07-02-2005, 06:55 PM
  #6  
Member
 
Join Date: Nov 2004
Posts: 71
Default

you need a regulator that adds fuel pressure as boost goes up, usually a 1 to 1 ratio. and a fuel pump that can do 5 psi to at least 20 psi. never ran my motor yet, it might run this weekend. 300 rwhp would be good ! 1200 pound car
scottystraub is offline  
Old 07-04-2005, 10:18 PM
  #7  
Senior Member
Thread Starter
 
Join Date: Jul 2003
Location: Deltona, Florida
Posts: 293
Default

cool cool my fp is a holley red it only flows 7 psi max. so i guess i need a bigger one if i wanna run 8-10 psi boost. what motor r u running 13b or 12A and is it ported ...
bigboi12A is offline  
Old 07-05-2005, 11:35 AM
  #8  
Member
 
Join Date: Nov 2004
Posts: 71
Default

[quote name='bigboi12A' date='Jul 4 2005, 07:18 PM']cool cool my fp is a holley red it only flows 7 psi max. so i guess i need a bigger one if i wanna run 8-10 psi boost. what motor r u running 13b or 12A and is it ported ...

[snapback]734143[/snapback]

[/quote]





13b 4 port street port
scottystraub is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KoiHoshi
Insert BS here
98
10-13-2005 11:45 PM
93 R1
Single Turbo Discussion
11
09-20-2002 04:23 AM
93 R1
3rd Generation Specific
5
09-17-2002 07:19 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread
Quick Reply: My Proposed Turbo Set Up


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.