My New T-04e From Loi
#14
I'm running 9 Ohm 1 watt resistors. put them in the power wires (the thick wire I think it's black with a white stripe) You will also need injector connectors for the 1600cc injectors.. I bought a HKS AIC 2 injector harness for $20 and cut the connectors off it...
The reason I went with the 9 ohm is because I took the stock injector Ohm reading 14.3 and 14.5 Ohm's - the 1600 cc injector 4.3 and 4.4 Ohms and it came out to closer to 9 Ohm's.. I'm sure you could run 10 ohm 1 watt resistors with no problem as well...
The reason I went with the 9 ohm is because I took the stock injector Ohm reading 14.3 and 14.5 Ohm's - the 1600 cc injector 4.3 and 4.4 Ohms and it came out to closer to 9 Ohm's.. I'm sure you could run 10 ohm 1 watt resistors with no problem as well...
#15
High impedance injectors range anywhere from 14-16 ohms, as long as your in the ball park it will work ok.
What I do is find a old CA-18 sylvia or 180 and take the resistor pack out of them and wire it up with that. If your in the states I know the real old like early 86 model FC's had resistor packs in them as well.
What I do is find a old CA-18 sylvia or 180 and take the resistor pack out of them and wire it up with that. If your in the states I know the real old like early 86 model FC's had resistor packs in them as well.
Thread
Thread Starter
Forum
Replies
Last Post
RX7 RAGE
3rd Generation Specific
16
04-30-2004 07:56 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)