View Poll Results: Manual Or Electronic Boost Controller
Voters: 31. You may not vote on this poll
Manual Or Electronic Boost Controller
12-23-2004, 10:53 AM
#21
Senior Member
Join Date: Jun 2003
Posts: 568
I have a ball and spring MBC...it's good, but I'd like to keep the WG shut until the point of no return. I can hear the WG open up a few psi before it's fully open.
Electronics is the way to do this...springs just can't.
I like the ease of the MBC. Two vacuum lines and no wires or solenoids or boost sensors. Very clean and reliable. That's about the only advantage I can think of.
I don't see an EBC making my times at an AutoX event any better, so I'll probably stick with the MBC.
Electronics is the way to do this...springs just can't.
I like the ease of the MBC. Two vacuum lines and no wires or solenoids or boost sensors. Very clean and reliable. That's about the only advantage I can think of.
I don't see an EBC making my times at an AutoX event any better, so I'll probably stick with the MBC.
01-12-2005, 08:26 PM
#29
Senior Member
Join Date: Mar 2003
Posts: 410
This is the one I have , its one of the best so far ! , much better than the more expensive HKS or Greddy.
The e-Boost electronic boost management system is the culmination of many years of research, development and innovation, with countless hours spent testing on the dyno, the race track and the drag strip. The e-Boost is the worlds first re-programmable boost controller utilising FLASH memory technology, making it compatible with future software upgrades, meaning your e-Boost will never be out-dated. The e-Boost is more than just the best performing electronic boost controller, it is a complete boost management system, making Turbosmart a world leader in boost control systems. This revolutionary product is loaded with features, squeezed into a package small enough to fit in the palm of your hand:
The latest in Hi-tech electronics, featuring a 16 bit RISC based FLASH memory CPU – faster and smoother boost response
Utilises the latest in surface mount technology – lighter, smaller and ultra compact
Electronics are housed in an anodised billet aluminium alloy housing – offering durability and reliability in harsh race conditions
Programmable gate pressure function to totally eliminate wastegate creep - you tell the wastegate when to open
Three internally or externally activated and individually programmable boost set points
Drag racers - improve your launch, run a different boost in each gear
High accuracy boost and vacuum display, readout accurate to within +/- 0.5% of full scale, boost gauge no longer required – great value
Readout can be tailored to suit your needs – display can be configured in KPA, Bar or PSI
Easy to read seven segment display with programmable bar graph and glow in the dark buttons
Programmable auxiliary output – e.g. water spray control, water/methanol injection, boost light
Programmable audible warning alarm – excellent for over-boost warning or full boost confirmation
Peak hold/Max Boost recall function
Revolutionary gauge type construction allows many practical mounting solutions – 66mm in diameter 55mm long. Suitable for Panel mounting, or in any 2 5/8 inch gauge pod or pillar mounting system.
The e-Boost electronic boost management system is the culmination of many years of research, development and innovation, with countless hours spent testing on the dyno, the race track and the drag strip. The e-Boost is the worlds first re-programmable boost controller utilising FLASH memory technology, making it compatible with future software upgrades, meaning your e-Boost will never be out-dated. The e-Boost is more than just the best performing electronic boost controller, it is a complete boost management system, making Turbosmart a world leader in boost control systems. This revolutionary product is loaded with features, squeezed into a package small enough to fit in the palm of your hand:
The latest in Hi-tech electronics, featuring a 16 bit RISC based FLASH memory CPU – faster and smoother boost response
Utilises the latest in surface mount technology – lighter, smaller and ultra compact
Electronics are housed in an anodised billet aluminium alloy housing – offering durability and reliability in harsh race conditions
Programmable gate pressure function to totally eliminate wastegate creep - you tell the wastegate when to open
Three internally or externally activated and individually programmable boost set points
Drag racers - improve your launch, run a different boost in each gear
High accuracy boost and vacuum display, readout accurate to within +/- 0.5% of full scale, boost gauge no longer required – great value
Readout can be tailored to suit your needs – display can be configured in KPA, Bar or PSI
Easy to read seven segment display with programmable bar graph and glow in the dark buttons
Programmable auxiliary output – e.g. water spray control, water/methanol injection, boost light
Programmable audible warning alarm – excellent for over-boost warning or full boost confirmation
Peak hold/Max Boost recall function
Revolutionary gauge type construction allows many practical mounting solutions – 66mm in diameter 55mm long. Suitable for Panel mounting, or in any 2 5/8 inch gauge pod or pillar mounting system.
