How many max PSI can you pump into a stock 13B motor before the apex seals get blown apart?.
Additionally, how many PSI will a stronger motor hold with 3mm seals and dowls and stuff? (max) |
Umm 30-40psi on race fuel easily. 3mm doesn't matter, dowel pinning is usually only done when you are in the 600+ hp range.
|
Well also, it only takes a few psi to blow the apex seals apart, running lean or bad timing/tuning.
|
It also depends on the engine too.I hear T2 engines aren't up to taking boost as well as the REW and RE ones.
|
Umm 30-40psi on race fuel easily. 3mm doesn't matter, dowel pinning is usually only done when you are in the 600+ hp range. |
Originally Posted by rx7machine' date='Feb 6 2003, 08:48 PM
Umm 30-40psi on race fuel easily. 3mm doesn't matter, dowel pinning is usually only done when you are in the 600+ hp range. |
Umm 30-40psi on race fuel easily. 3mm doesn't matter, dowel pinning is usually only done when you are in the 600+ hp range. Damn.. who the hell would want to run 30-40 psi anyways.. https://www.nopistons.com/forums/pub...IR#>/dunno.gif someone that would wanna break their ear drums with the high pitch noise |
i'd agree with you on that one....... hehe :bigok:
|
It would sound quite nice until it went crunch whack crunch grrch agrcha grrrrcha grechaaa
|
Originally Posted by rx7machine' date='Feb 6 2003, 11:48 PM
Who wouldn't want to https://www.nopistons.com/forums/pub...IR#>/dunno.gif |
All times are GMT -5. The time now is 05:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands