How Many People Run A Single Turbo On A Stock Moto
#21
Originally Posted by 94touring' date='May 3 2003, 06:28 AM
Thats very interesting, especially with 89 octane. But doesn't really suprise me I guess.
Where did the rule of thumb 'don't go over 15psi on pump gas come from anyways'?
Where did the rule of thumb 'don't go over 15psi on pump gas come from anyways'?
mike
#22
Originally Posted by jspecracer7' date='May 2 2003, 07:10 PM
I know that Dragon boost 1.5 kilos with water injection, has a modest a/f and knocks 21 on his PFC
Sorry that was way off topic huh?(I don't even have a single yet )
#23
Originally Posted by jackdhammer' date='May 5 2003, 02:24 PM
Oh **** don't tell me knocking 21 is high Or are you saying 21 is low for what he's doing Because my **** knocks between 30 and 60 with the occassional jump into the 90s or low hundreds, but never when I'm pushing it.
Sorry that was way off topic huh?(I don't even have a single yet )
Sorry that was way off topic huh?(I don't even have a single yet )
#24
Originally Posted by mjw' date='May 1 2003, 02:27 PM
That's BS, an RX6 on stock ports works great and is probably more reliable than the stock twins with good tuning. I have a TO4E on stock ports and it runs great, my car is much happier with this setup than the stock twins.. it is ALL in the tuning. If someone wanted to put a T88 on a stock port motor I may advise against that, but then look at ErnieT.. tuning, tuning, tuning!!
Matt
Matt
#25
Originally Posted by ccarlisi' date='May 1 2003, 02:27 PM
My friend mike just dynoed his 3540 on a stock reman. He put down 402hp at 6000rpms at 15psi. Due to problems with the boost controller they couldn't get good numbers above 6000.
#26
Originally Posted by mjw' date='May 1 2003, 02:27 PM
That's BS, an RX6 on stock ports works great and is probably more reliable than the stock twins with good tuning. I have a TO4E on stock ports and it runs great, my car is much happier with this setup than the stock twins.. it is ALL in the tuning. If someone wanted to put a T88 on a stock port motor I may advise against that, but then look at ErnieT.. tuning, tuning, tuning!!
Matt
Matt
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)