- - Going Single Turbo
(https://www.nopistons.com/single-turbo-discussion-13/going-single-turbo-22828/)
Stryk3r
08-15-2003 04:51 PM
Hi guys i am going single turbo here in pakistan.....i would like to know what things to take into consedration......and what do do with all those vaccume lines....please advise...
apexkw
08-15-2003 04:52 PM
what ecu are you going to be using?
apexkw
08-15-2003 04:53 PM
what turbo kit and wastegate, boost controller and etc....? alittle more info would help greatly...
Stryk3r
08-15-2003 06:03 PM
i am using apexi power fc and the HKS to4e with tial wastegate nd apexi boost controller
wraith
08-15-2003 06:08 PM
you don't need a seperate boost controller with the PFC.....i think
WishIhadaRX7
08-15-2003 06:23 PM
a lot of people still use em though
apexkw
08-15-2003 07:13 PM
the apexi boost controller that comes with the power fc as an extra option? or a apexi boost controller...avcr or something like that???
turbovr6
08-15-2003 07:38 PM
Originally Posted by wraith' date='Aug 15 2003, 06:08 PM
you don't need a seperate boost controller with the PFC.....i think
the boost controoler is an add-on for the power fc , like $500, it's basically the same as getting the avc-r. uses the same soilnoid and stuff. Better off with a stand alone boost controller though. As far as all those lines go.....JUNK THEM. I have a similar setup(pfc,to4e,blah blah blah) Theese are my vaccum lines. 1 from manifold to the BOV, 1 from manifold to map sensor, 1 from manifold to wastegate, 1 from wastegate to boost solinoid, 1 from soilinoid to manifold, 1 from manifold to FPR. Thats about it yep a whole 6 lines https://www.nopistons.com/forums/pub...IR#>/bigok.gif
GarageBoy
08-15-2003 09:42 PM
You can use the PFC to control your turbo as is. The $500 kit is just for solenoids and a MAP sensor for High Boost
toddp31
08-15-2003 10:36 PM
I think the stock boost sensor only reads to 1.1 bar over that it is good idea to get a 2.0 bar sensor.