hey guys im currently stuck on the gt42/gt42r right now running full divided twin 38mm wastegate manifold on a 13b-re (cosmo) my question is for those of you running the gt42 (any motor) when are you obtaining full boost? what type of ports are you running? see the thing is yes i want large numbers out of the set up but i dont truelly want to be drag, more interested in drift 400ish. but i personally dont want boost at 3g pushing 350 at that rpm i want my numbers to be on the high side of the rpm band not right away.



now i know there are those of you scoffing say that turbo is just too big for drift not enough response yad yada yada im really looking for some outlook on hte setups of those of you running this size turbo, also if you guys with the t78 plus could chim in thatd be great.

thanks in advance

z

 

also looking at the gt35r/t4 setup im just hooked on bigger is better i just dont think 2300 give or take for the 42r will be worth it only using half the potential ya know help me out guys what do you think?

z

 

If you're looking for 400 hp near the top of your rpm band, than I would recommend going with a GT40 with a larger sized exhaust housing. This will get you into your hp range and it won't spool as quickly. Talk to Sean at A-Spec tuning.



- Hand

 

hey thanks ya iv been searching and looking at some compressor maps yada yada and that is what i think will be the final out come, but first i will be seeing how far i can take the stock twins too in non sequential then the gt40r will be dropped in

later

z