2nd Generation Specific 1986-1992 Discussion

Evil Car

Thread Tools
 
Search this Thread
 
Old Sep 18, 2005 | 04:32 PM
  #1  
gagamazda's Avatar
Thread Starter
Member
 
Joined: Aug 2003
Posts: 38
Default

My 88 TII stalls whenever a load is put on the engine. Press the brakes, it stalls. Turn the power steering, it stalls. I checked the TPS, timing, cleaned the BAC, changed vacuum lines-still the same thing. I'm on the roof ready to jump (not the roof of the car). Any ideas? It's basically stock, cat-back, fuel cut, Wal. fuel pump and thats it.
Old Sep 18, 2005 | 04:34 PM
  #2  
drunkin_idiot's Avatar
Senior Member
 
Joined: Feb 2004
Posts: 1,505
From: Peoria, AZ
Default

Is ur alternator working?
Old Sep 18, 2005 | 04:58 PM
  #3  
ColinRX7's Avatar
Senior Member
 
Joined: Oct 2003
Posts: 3,502
From: Canada
Default

check your charging system





sounds like a faulty battery rather than an alternator.. but faulty batteries can happen from toasted alternators or a battery reused when an alternator just got pooched and replaced.
Old Sep 18, 2005 | 06:14 PM
  #4  
gagamazda's Avatar
Thread Starter
Member
 
Joined: Aug 2003
Posts: 38
Default

Brand new battery, charging system is good.
Old Sep 18, 2005 | 06:49 PM
  #5  
drunkin_idiot's Avatar
Senior Member
 
Joined: Feb 2004
Posts: 1,505
From: Peoria, AZ
Default

How about ur battery terminals, are the connected good?
Old Sep 18, 2005 | 07:27 PM
  #6  
gagamazda's Avatar
Thread Starter
Member
 
Joined: Aug 2003
Posts: 38
Default

terminals are fine.
Old Sep 18, 2005 | 09:46 PM
  #7  
ColinRX7's Avatar
Senior Member
 
Joined: Oct 2003
Posts: 3,502
From: Canada
Default

Make sure you have good engine grounds, chassis grounds, ECU and misc sensor grounds..





If you don't find the problem there...





How well does the engine run? Make alot of power? Yes? No?
Old Sep 19, 2005 | 05:45 AM
  #8  
gagamazda's Avatar
Thread Starter
Member
 
Joined: Aug 2003
Posts: 38
Default

Engine runs good. Good compression, burns very little oil, just takes a while to warm up.
Old Sep 19, 2005 | 09:30 AM
  #9  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

does the bac valve actually work?
Old Sep 19, 2005 | 05:08 PM
  #10  
teknics's Avatar
Senior Member
 
Joined: Dec 2002
Posts: 4,837
From: Wayne, NJ
Default

Originally Posted by j9fd3s' post='760273' date='Sep 19 2005, 10:30 AM

does the bac valve actually work?


Yea i was gonna suggest pulling off your BAC and cleaning it thoroughly and then check to see if it is operating properly.



kevin.



All times are GMT -5. The time now is 03:57 PM.