I Have Parts For Sale :)
Thread Starter
Junior Member
Joined: Aug 2005
Posts: 12
From: Kansas City
I am new to your forum as I just found out about it googling. I am a part of 4 rotary forums now, so I will always have something to read and something to learn.
Anyway I have an 86 rex that got broken into and I got my pass window busted (the tint I had on there kept the glass from going everywhere) and my door was wounded pretty bad (but fixable) from the assault with a crow bar. While I was in search for a pass window and the exterior window-to-door strip of metal, I found a 91 n/a for sale for $100 form a guy who just needed the space. The car had been hit on the front left by an escalade just hard enough to bend the frame out of commision, so the front left suspension is now a steel pretzel, literaly. The engine was good, it had a $1500 custom 3" all the way exaust, and most importantly a pass window. I am going to be gutting the car and its mostly intact beside the interior parts I will remove. the car has the circle tailights, and the are in good condition, minus the left rear turn signal is missing the lens. Those are for sale, for sure. You guys can make on offer on those, and if there is anything else you want just ask.
I am going to be rebuilding that engine, and I will be putting that exaust on my car.
Which leads me to a question. I know a fair amount about how rotarys work, So I think I know what to do here, but im just not sure.
The way I understand it the 5th and 6th ports open the way and the time they do based on back pressure. I am pretty sure the exaust I am putting on is straight 3 inch all the way, which means low back pressure. Should I wire my 5/6 open all the time?
Anyway I have an 86 rex that got broken into and I got my pass window busted (the tint I had on there kept the glass from going everywhere) and my door was wounded pretty bad (but fixable) from the assault with a crow bar. While I was in search for a pass window and the exterior window-to-door strip of metal, I found a 91 n/a for sale for $100 form a guy who just needed the space. The car had been hit on the front left by an escalade just hard enough to bend the frame out of commision, so the front left suspension is now a steel pretzel, literaly. The engine was good, it had a $1500 custom 3" all the way exaust, and most importantly a pass window. I am going to be gutting the car and its mostly intact beside the interior parts I will remove. the car has the circle tailights, and the are in good condition, minus the left rear turn signal is missing the lens. Those are for sale, for sure. You guys can make on offer on those, and if there is anything else you want just ask.
I am going to be rebuilding that engine, and I will be putting that exaust on my car.
Which leads me to a question. I know a fair amount about how rotarys work, So I think I know what to do here, but im just not sure.
The way I understand it the 5th and 6th ports open the way and the time they do based on back pressure. I am pretty sure the exaust I am putting on is straight 3 inch all the way, which means low back pressure. Should I wire my 5/6 open all the time?
Thread Starter
Junior Member
Joined: Aug 2005
Posts: 12
From: Kansas City
Its ok. no offense taken, I just didnt want enemies after being here for like 2 weeks or whatever ha
No the parts car is an n/a and I am selling the engine and tranny. I WILL post all the info about that in the for sale room, in case you all and damon whatever were gonna ask... lol
No the parts car is an n/a and I am selling the engine and tranny. I WILL post all the info about that in the for sale room, in case you all and damon whatever were gonna ask... lol
Thread
Thread Starter
Forum
Replies
Last Post
Luke_Tech
RX-7 & RX-8 Parts For Sale & Wanted
0
May 17, 2007 01:16 AM
partzman
RX-7 & RX-8 Parts For Sale & Wanted
2
Aug 14, 2002 08:41 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)