Engine



Renesis stands for Rotary Genesis



The difference between the renesis and the his older brothers is the rotor chamber

1)improvements in seals insures good pressure

2)The area of rotor improvement had increased hence increasing the time of each expansion cycle (of the 4 cycles: intake, firing, combustion, exhaust), also the heat produced thru each cycle has been reduced.



Standard Motor: 210HP

High Power Motor: 250HP



Comparsion with the 13B REW

1)Rotor has been reduced in weight by 11%

2)Flywheel has been reduced in weight by 20%



Suspension

1)Uses the B frame design unlike the older FD which uses the C frame design.

2)3 sway bars under the chasis

3)in 16's or 18' rims.

4)50/50 even weight distribution

5)lower center of gravity with motor only 39 cm from the ground

6)English is not my 1st or 2nd language, I couldn't tell you about the suspension design.

7)1300kg, 50kg more than the FD



LSD

1)2-way "Super" LSD [2 way is measured in TSD (Torque Bias Ratio)]



The American base is set at $26108US Dollars for base, $32100 USD for full load



For Canadian pricing, goto my post in the Canada/Regional section



I spent a whooping 20 minutes typing this (some way to spend my spring break) . So I hope you will enjoy it.

I can see some of my spelling mistake on the above post. :p



on the 5th line, its "The area of rotor movement", not "improvement"



Also I forgot to mention the difference between the high power motor with the standard one.



The high power motor has different sets of intake "inlets" which opens at different RPM. At 7250RPM, the renesis motor will switch into its "direct free flowing mode", at this point, the motor is taking in as much air as it possibly could.

pretty good if english isnt your first or second language

yeah..I've been in Canada for so many years.



I managed to pick up pretty much of every slant we have, ehh?



But I just dunno how to say "double independent suspension arms" correctly.

where did you get this information?

Does anyone know where the technical article on the new motor is? I read it last year but haven't been able to find it recently. I remember hearing that the new motor has a dry sump and want to confirm.

I got it from an East Asian magazine, where I came from.



The North American magazines are a little bit conservative on the techical aspect of the cars. A magazine such as Car & Driver or Road Track wouldn't talk much about things such as manufacturer hack modes on the factory radio that factory mechanics can go into if he wants a quick check on your compression or the car's average running temperature.

Sounds cool. I just got soemthing in the mail about the RX-8 and its specs..

This guy is on the inside

nono, I'm not from the inside of course, I wish I was. https://www.nopistons.com/forums/pub...IR#>/smile.png



you can find most of these info on the net if you look hard enough



here are some pictures to explain what I wrote on the above. They're too big for me to post them directly here.



http://media.mazda.ch/dossiers/RX-8/images...gdynamics10.jpg

-here you see a bend intake hose and a straight one, at 7250rpm, it will switch from the lefty to the righty.



http://media.mazda.ch/dossiers/RX-8/images...gdynamics07.jpg

-here is how the seals and the rotor movements are changed to enhance the expansion cycle.



http://media.mazda.ch/dossiers/RX-8/images...gdynamics08.jpg

-I didn't really talk about this one. But the picture (and its explanations) explains itself.



http://media.mazda.ch/dossiers/RX-8/images...gdynamics33.jpg

http://media.mazda.ch/dossiers/RX-8/images...gdynamics34.jpg

the suspension and how it works.



the rest of the pics are here



http://media.mazda.ch/dossiers/RX-8/Photo-RX8-F.htm



enjoy.

ok then you are a Mazda salesman, lol

Excellent.. group buy anyone? lol https://www.nopistons.com/forums/pub...#>/biggrin.png

mad niggaz is hating on the rx8 and the car still hasnt even come out yet. godam these bastards. The 8( oh **** i gotta get use to this ) didnt do anything wrong. There just hating i hope mazda blow thems out. In honor of the rx8 coming out ima try to get a job at a car dealer and ima help sell rx-8s. Ima preach to the kkkustomers lol

The RX-8 is nice.. but, honestly.. I don't see too much to shout about.. once mazda gets the rotary tuned and back in action.. a few years down the road, then people will know what its all about.. https://www.nopistons.com/forums/pub...#>/biggrin.png

So is the engine a 20B? I saw a previous forum about 20B discussions. I was just wondering, thanks!

???



Is there a translator in the house?

i thought all u new york ppeps spoke the same language. https://www.nopistons.com/forums/pub...IR#>/dunno.gif



thanks for all the info, EEE.



any of u guys think i should sticky this??