F.S. SCCA ITS/STL Mazda RX-7
09-04-2011, 09:51 PM
#1
Senior Member
Thread Starter
Join Date: Nov 2010
Posts: 104
1987 Mazda RX-7
SCCA ITS/STL
Nice clean car, turn key
Has Current SCCA log book and passed a 2011 SCCA tech
Freshly rebuilt 13b 6 port engine, 1 Waterford Hills race weekend on engine (will run race 6 if not sold by then)
Torsen 4.88 LSD rear end
Racing Beat header into 3” exhaust with high flow muffler, passes sound at WHRRI (76 db)
Full custom roll cage built by Jim Powski Racecraft Engineering
One set of mounted Hoosier R6 stickers ($1000 value)
4 sets of wheels (2 sets lightweight Kosei K1 racing wheels with Hoosier R6’s, 1 set lightly used Hoosier rain tires on Enkei Wheels, 1 set unknown brand with old Kumho slicks used as transport wheels)
Brand new custom U-flow radiator made by Superior Radiator
Electric fan, switch operated
Stainless steel braided oil cooler lines
RJS 5 point harness, belts replaced 2010
Kirkey Aluminum seat
Momo steering wheel with quick release hub
Autometer gauges; tach, oil temp, oil pressure, water temp
Fuel safe fuel cell with baffles and fuel pumps set up for no starvation
Fuel test port
Under hood inline fuel pressure gauge
Steel braided brake lines
Advance Dynamics Shocks and struts with rebound and compression adjustment
Ground Control coilovers
Several sets of Eibach Springs of various spring rates
Ground Control camber caster plates
Many spares: hoods, doors, bumpers, fenders, drive shafts, rear hatch lids, front and rear sub-frames, 4 piston brake calipers, 5 lug hubs, front control arms, intakes, transmissions, oil cooler, stock 4.10 LSD, ignition coils, and misc other parts
Race ready at $4500
Car is located in Warren, MI 48092
Contact me through PM or at my cell 586 -5 nine 6- 0 six six 5
Thanks, John
SCCA ITS/STL
Nice clean car, turn key
Has Current SCCA log book and passed a 2011 SCCA tech
Freshly rebuilt 13b 6 port engine, 1 Waterford Hills race weekend on engine (will run race 6 if not sold by then)
Torsen 4.88 LSD rear end
Racing Beat header into 3” exhaust with high flow muffler, passes sound at WHRRI (76 db)
Full custom roll cage built by Jim Powski Racecraft Engineering
One set of mounted Hoosier R6 stickers ($1000 value)
4 sets of wheels (2 sets lightweight Kosei K1 racing wheels with Hoosier R6’s, 1 set lightly used Hoosier rain tires on Enkei Wheels, 1 set unknown brand with old Kumho slicks used as transport wheels)
Brand new custom U-flow radiator made by Superior Radiator
Electric fan, switch operated
Stainless steel braided oil cooler lines
RJS 5 point harness, belts replaced 2010
Kirkey Aluminum seat
Momo steering wheel with quick release hub
Autometer gauges; tach, oil temp, oil pressure, water temp
Fuel safe fuel cell with baffles and fuel pumps set up for no starvation
Fuel test port
Under hood inline fuel pressure gauge
Steel braided brake lines
Advance Dynamics Shocks and struts with rebound and compression adjustment
Ground Control coilovers
Several sets of Eibach Springs of various spring rates
Ground Control camber caster plates
Many spares: hoods, doors, bumpers, fenders, drive shafts, rear hatch lids, front and rear sub-frames, 4 piston brake calipers, 5 lug hubs, front control arms, intakes, transmissions, oil cooler, stock 4.10 LSD, ignition coils, and misc other parts
Race ready at $4500
Car is located in Warren, MI 48092
Contact me through PM or at my cell 586 -5 nine 6- 0 six six 5
Thanks, John
Thread
Thread Starter
Forum
Replies
Last Post
S1MPSONS
Race Prep
1
10-20-2011 10:33 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)