83' Limited Edition, 85' It7/ita Scca
10-26-2003, 09:15 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2003
Posts: 1
CARS LOCATED IN MICHIGAN
83' LE
The car runs great was painted a few years ago but has minor pealing on front/rear bumpers. Has storage bin cancer, but I will be getting new sheet metal from another car. Needs new exhaust and I will be putting another clutch in the car. The interior was mostly taken apart, car was going to be a racecar. All interior parts that did not crumble during removal are included. I can install the sheet metal in the bins, if so I will ask more for the car.
Current condition,
$1150 OBO
85' GS IT7 car
The car is an 84GS with GSL rear disc and LSD. No sunroof car. Blistein struts, eibch springs all around. Front suspension: big mazdacomp anti-swaybar, coil overs, camber plates, and strut bar. The rear suspension has no anit-swaybar, and a panhard bar. The car has a welded in kirk cage, the cage was taken from another car. When the cage was installed *by last owner* the windshield bar was sleaved, I recommend a new non sleaved bar. Also the drivers side doors bars were not put in. The car has stainless steel brake lines on all 4. The brake lines are run inside the car to be used with a proportioning valve, the valve was never bought for the car. The car has a roadrace header, duals with presilencers into a single super trap. Brand new Fuel Safe 8gal enduro cell never installed, holley red fuel pump, with earls inline filter. Fuel lines are all braided. Car had automeater tach, volt, oil pressure, temp, fuel pressure, and water temp gauges. Stock cluster is also in car. I have new front and rear brake rotors (not installed), also new wheel bearings that are not completely installed. Also new oil pan gasket is included. Car also has new G-Force 6pt cam-lock harness. Window net hardware included, also hood pins not installed. Car needs seat. Car needs to be painted. I have 3 spare doors, 4 or 5 hoods total, one complete set of hatch glass, one spare windshield, boxes of other various spares, all in plastic stackable boxes, that are labeled by contents. 3 note books on the car. Panasport style wheels, set of stock "plus sign" wheels, and set of steel wheels included. I'm sure there are parts I am forgetting.
asking $2500 OBO!, must arrange to have towed to your home/shop.
You could build two great cars with all the parts. The parts alone if sold individually are worth more than I'm asking, but I don't have time to part the cars. I will trade everything for a decent 2nd generation turbo RX7.
email for pictures!
email: robbmac1@yahoo.com
cell: 248-935-1423
AIM: RmacRX7
EVERYTHING MUST GO!
$3500 takes both cars and all parts! Both cars have titles and can be registered.
83' LE
The car runs great was painted a few years ago but has minor pealing on front/rear bumpers. Has storage bin cancer, but I will be getting new sheet metal from another car. Needs new exhaust and I will be putting another clutch in the car. The interior was mostly taken apart, car was going to be a racecar. All interior parts that did not crumble during removal are included. I can install the sheet metal in the bins, if so I will ask more for the car.
Current condition,
$1150 OBO
85' GS IT7 car
The car is an 84GS with GSL rear disc and LSD. No sunroof car. Blistein struts, eibch springs all around. Front suspension: big mazdacomp anti-swaybar, coil overs, camber plates, and strut bar. The rear suspension has no anit-swaybar, and a panhard bar. The car has a welded in kirk cage, the cage was taken from another car. When the cage was installed *by last owner* the windshield bar was sleaved, I recommend a new non sleaved bar. Also the drivers side doors bars were not put in. The car has stainless steel brake lines on all 4. The brake lines are run inside the car to be used with a proportioning valve, the valve was never bought for the car. The car has a roadrace header, duals with presilencers into a single super trap. Brand new Fuel Safe 8gal enduro cell never installed, holley red fuel pump, with earls inline filter. Fuel lines are all braided. Car had automeater tach, volt, oil pressure, temp, fuel pressure, and water temp gauges. Stock cluster is also in car. I have new front and rear brake rotors (not installed), also new wheel bearings that are not completely installed. Also new oil pan gasket is included. Car also has new G-Force 6pt cam-lock harness. Window net hardware included, also hood pins not installed. Car needs seat. Car needs to be painted. I have 3 spare doors, 4 or 5 hoods total, one complete set of hatch glass, one spare windshield, boxes of other various spares, all in plastic stackable boxes, that are labeled by contents. 3 note books on the car. Panasport style wheels, set of stock "plus sign" wheels, and set of steel wheels included. I'm sure there are parts I am forgetting.
asking $2500 OBO!, must arrange to have towed to your home/shop.
You could build two great cars with all the parts. The parts alone if sold individually are worth more than I'm asking, but I don't have time to part the cars. I will trade everything for a decent 2nd generation turbo RX7.
email for pictures!
email: robbmac1@yahoo.com
cell: 248-935-1423
AIM: RmacRX7
EVERYTHING MUST GO!
$3500 takes both cars and all parts! Both cars have titles and can be registered.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)