1993 R1
#1
For Sale
1993 R1 RX7
Mods:
Ported Motor
Apexi Power FC- Steve Kan Tuning
Datalogit
Garrett GT35/40 single turbo A-Spec kit
550/1600 fuel injectors
SS braided fuel lines
SX fuel pressure regulator
ACT HD 6 puck clutch
Greddy Exhaust
Greddy intake filter
Greddy elbow
Koyo Radiator- Evans coolant
Apexi Frontmount Intercooler
Underdrive pulleys
Solid motormounts
Crossdrilled/slotted rotors
Hawk HPS pads
SSR Integrals 18X9 all around
Toyo T1S 95% tread left
Sparco racing seats
MoMo steering wheel
Apexi boost guage
Apexi EGT gauge
Fuel pressure gauge
Ground control coilovers
Tokico shocks
Racing Beat front and rear sway bars
Racing Beat front sway bar mount reinforcement strut
5th gear synchro updated
SS braided brake and transmission lines
Short shifter
Optima red top relocated to rear bin
Rotary Extreme N1 Hood
I’ll include a pair of stock wheels with a brand new set of Nitto 555R wheels for the drag strip. The wheels have not even been mounted. I also have 2 spare tires to use up front.
I’ve also got some M2 toe links and trailing arms that have not been installed yet. These are the solid metal ones with the solid help joints.
The only issue with the car is when the vehicle was rebuilt aviation seals were used and I got a bad batch. They are not holding and causing the car to have low compression. The vehicle builds boost just a lot slower than it should with the Garret. Once it get warm I have to let the car cool down or it won’t be able to start. This vehicle will pretty much need to have the seals replaced. Other than that the car has less than 5K miles on the motor. I’m sure it will not need a full rebuild.
Now for the pricing.
I figured an asking price of $18,000 was normal for a vehicle like this. So for the price of replacing the seals and the hassle I’ll deduct $3000.
Sale price is $15,000 OBO
If you think this is too much please let me know.
I prefer local sale so that the buyer can completely check out the vehicle but willing to ship at buyers expense. The vehicle is driveable.
Email me at silverr1@***.net if you have any questions.
Additional pics available upon request.
[attachment=33131:attachment]
[attachment=33132:attachment]
[attachment=33133:attachment]
[attachment=33134:attachment]
1993 R1 RX7
Mods:
Ported Motor
Apexi Power FC- Steve Kan Tuning
Datalogit
Garrett GT35/40 single turbo A-Spec kit
550/1600 fuel injectors
SS braided fuel lines
SX fuel pressure regulator
ACT HD 6 puck clutch
Greddy Exhaust
Greddy intake filter
Greddy elbow
Koyo Radiator- Evans coolant
Apexi Frontmount Intercooler
Underdrive pulleys
Solid motormounts
Crossdrilled/slotted rotors
Hawk HPS pads
SSR Integrals 18X9 all around
Toyo T1S 95% tread left
Sparco racing seats
MoMo steering wheel
Apexi boost guage
Apexi EGT gauge
Fuel pressure gauge
Ground control coilovers
Tokico shocks
Racing Beat front and rear sway bars
Racing Beat front sway bar mount reinforcement strut
5th gear synchro updated
SS braided brake and transmission lines
Short shifter
Optima red top relocated to rear bin
Rotary Extreme N1 Hood
I’ll include a pair of stock wheels with a brand new set of Nitto 555R wheels for the drag strip. The wheels have not even been mounted. I also have 2 spare tires to use up front.
I’ve also got some M2 toe links and trailing arms that have not been installed yet. These are the solid metal ones with the solid help joints.
The only issue with the car is when the vehicle was rebuilt aviation seals were used and I got a bad batch. They are not holding and causing the car to have low compression. The vehicle builds boost just a lot slower than it should with the Garret. Once it get warm I have to let the car cool down or it won’t be able to start. This vehicle will pretty much need to have the seals replaced. Other than that the car has less than 5K miles on the motor. I’m sure it will not need a full rebuild.
Now for the pricing.
I figured an asking price of $18,000 was normal for a vehicle like this. So for the price of replacing the seals and the hassle I’ll deduct $3000.
Sale price is $15,000 OBO
If you think this is too much please let me know.
I prefer local sale so that the buyer can completely check out the vehicle but willing to ship at buyers expense. The vehicle is driveable.
Email me at silverr1@***.net if you have any questions.
Additional pics available upon request.
[attachment=33131:attachment]
[attachment=33132:attachment]
[attachment=33133:attachment]
[attachment=33134:attachment]
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)