Updated Parts For Sale List. S4/s5 N/a-tii Parts.
04-27-2005, 12:05 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Laredo, Tx
Posts: 423
Parts list:
S5 N350 AFM 60 Shipped
S4 N/a Guage Cluster 40 Shipped
S5 N/a Guage Cluster 50 Shipped
RE Amemiya Twin Additional Injector Elbow for a Turbo FC(also fits N/a TB though) 65 Shipped
S4 460cc Injector Set 75 Shipped(high impedance?)
S4 550cc Injector Set 100 Shipped(Offset notch, Redtop)
S4 Main Relay 35 Shipped
Two Round Carbon Fiber "CF" Planet Audio Speakers(2 way IIRC) that fit into the Rear towers using the stock Metal rings 35 Shipped
S4/S5 GREY Rear Cargo Cover, Does not include the Speaker grills its just the horizontal cover itself nothing else, 120 Shipped OBO
OEM Clutch from an S4 n/a, Unknown mileage sold AS-IS 25 Shipped
OEM Pressure Plate S4 n/a, Unknown Mileage sold AS-IS 25 Shipped or 45 Shipped in combo with the clutch
OEM Flywheel from an S4 N/a 30+s/h(heavy)
S5 Turbo Stuff
Harness(pass. side) Needs a new O2 Sensor run and has two emissions plugs broken(you can just replace them with your old ones or new ones 225 Shipped(non-negotiable, sorry)
TPS Came off of working 91 Low milage Turbo that is going haltech, 120 Shipped
Stock TID 70+s/h
Stock Exhaust Pipe between the DP and the MP with an O2 bung in place for wideband tunning 25+s/h
AFM(N370) working beatifully 100 Shipped
Flywheel 50+s/h
MOP/OMP Lines MINT CONDITION less than 5k miles on them! 80 Shipped
MOP injector set 60+s/h All tested with the blow but no vac test.
Air intake Sensor 15+s/h
"Thermo" sensor 15+s/h
aux fan sensor 15+s/h
S5 Black Vinyl/Cloth GXL seats:
I'm asking 225 shipped in the lower 48 states. Anywhere else I will quote you 100+ the actual s/h price and any other fees.
I will have pictures of these up soon. Their condition is good. The passenger's side is probably a 6-7 of 10 and the driver's side is a 5.5-6.5 of 10. The vinyl has no tears that I have seen in the time i've used them or inspected them.
Features: They have the Adjustable headrest with multi-position tilt head cushion. Driver's side has three(or four?) position lumbar support. Also has a seat tilt feature which I find is really cool. Both obviously recline and the passenger side seat has a map pocket on the back of the back-rest. The side bolsters are still good and hold you better than the base model seats. The driver's side does have wear on its bottom bolsters but thats normal from every day use.
I've been having trouble uploading pictures thus far i'll see if I can attatch some of the seats soon.
Buyers MUST read the following and AGREE if you are buying anything here from me.
Pictures available for all parts but the Air temp sensor right now. Other parts are available just ask.
Disclaimer/conditions/warnings: I am selling some partsfor a friend so the prices are not very negotiable but if you have a serious(no lowballing) offer PM me with it. Prices don't include shipping costs unless stated otherwise. All parts are sold as is with no warranty whatsoever. Make sure you understand what you are buying prior to the purchase as I do not give refunds once a purchase is made. We are not responsible for any dammage/injury/death or other event negative or otherwise that should occur due to use, improper or otherwise, of any item bought from us. I use paypal and I am a verified premier member with over 88 Verified transactions under my belt. If you are interested in feedback check rx7club.com's feeback section or my ebay account(santiago1984).
Shipping information: Normal shipping method is UPS ground through a shipping agent. I use UPS ground because it isn't overly expensive, it has great tracking, and nominal insurance is standard(100 dollars). Given I use a shipping agent the shipping charges are slightly higher than those given at the UPS website. If you have a problem with this too bad because it will be just as costly for me to drive to the UPS compount, 25 miles away, i'm not going to waist my fuel for you all, sorry. If you wish to use another shipping method I can use Fedex or DHL. I very much dislike using these other methods because I have had previous bad experiences personally and they are far away from me. You are also on your own if I ship outside of UPS. If I ship with UPS I can normally help when there is a shipping mixup because I know the agent I use and we can locate things for you. I refuse to have to deal with pawn workers at fedex or DHL. Also once an item is shipped it is the buyer's responsability, not ours.
Shipping costs: Even small items cost around 10 dollars to ship if you aren't prepared to pay, don't post or ask.
*New Shipping option* I am now also offering USPS Priority shipping for SOME items Please check with me for your specific parts requests and i'll try to help you all out.
S5 N350 AFM 60 Shipped
S4 N/a Guage Cluster 40 Shipped
S5 N/a Guage Cluster 50 Shipped
RE Amemiya Twin Additional Injector Elbow for a Turbo FC(also fits N/a TB though) 65 Shipped
S4 460cc Injector Set 75 Shipped(high impedance?)
S4 550cc Injector Set 100 Shipped(Offset notch, Redtop)
S4 Main Relay 35 Shipped
Two Round Carbon Fiber "CF" Planet Audio Speakers(2 way IIRC) that fit into the Rear towers using the stock Metal rings 35 Shipped
S4/S5 GREY Rear Cargo Cover, Does not include the Speaker grills its just the horizontal cover itself nothing else, 120 Shipped OBO
OEM Clutch from an S4 n/a, Unknown mileage sold AS-IS 25 Shipped
OEM Pressure Plate S4 n/a, Unknown Mileage sold AS-IS 25 Shipped or 45 Shipped in combo with the clutch
OEM Flywheel from an S4 N/a 30+s/h(heavy)
S5 Turbo Stuff
Harness(pass. side) Needs a new O2 Sensor run and has two emissions plugs broken(you can just replace them with your old ones or new ones 225 Shipped(non-negotiable, sorry)
TPS Came off of working 91 Low milage Turbo that is going haltech, 120 Shipped
Stock TID 70+s/h
Stock Exhaust Pipe between the DP and the MP with an O2 bung in place for wideband tunning 25+s/h
AFM(N370) working beatifully 100 Shipped
Flywheel 50+s/h
MOP/OMP Lines MINT CONDITION less than 5k miles on them! 80 Shipped
MOP injector set 60+s/h All tested with the blow but no vac test.
Air intake Sensor 15+s/h
"Thermo" sensor 15+s/h
aux fan sensor 15+s/h
S5 Black Vinyl/Cloth GXL seats:
I'm asking 225 shipped in the lower 48 states. Anywhere else I will quote you 100+ the actual s/h price and any other fees.
I will have pictures of these up soon. Their condition is good. The passenger's side is probably a 6-7 of 10 and the driver's side is a 5.5-6.5 of 10. The vinyl has no tears that I have seen in the time i've used them or inspected them.
Features: They have the Adjustable headrest with multi-position tilt head cushion. Driver's side has three(or four?) position lumbar support. Also has a seat tilt feature which I find is really cool. Both obviously recline and the passenger side seat has a map pocket on the back of the back-rest. The side bolsters are still good and hold you better than the base model seats. The driver's side does have wear on its bottom bolsters but thats normal from every day use.
I've been having trouble uploading pictures thus far i'll see if I can attatch some of the seats soon.
Buyers MUST read the following and AGREE if you are buying anything here from me.
Pictures available for all parts but the Air temp sensor right now. Other parts are available just ask.
Disclaimer/conditions/warnings: I am selling some partsfor a friend so the prices are not very negotiable but if you have a serious(no lowballing) offer PM me with it. Prices don't include shipping costs unless stated otherwise. All parts are sold as is with no warranty whatsoever. Make sure you understand what you are buying prior to the purchase as I do not give refunds once a purchase is made. We are not responsible for any dammage/injury/death or other event negative or otherwise that should occur due to use, improper or otherwise, of any item bought from us. I use paypal and I am a verified premier member with over 88 Verified transactions under my belt. If you are interested in feedback check rx7club.com's feeback section or my ebay account(santiago1984).
Shipping information: Normal shipping method is UPS ground through a shipping agent. I use UPS ground because it isn't overly expensive, it has great tracking, and nominal insurance is standard(100 dollars). Given I use a shipping agent the shipping charges are slightly higher than those given at the UPS website. If you have a problem with this too bad because it will be just as costly for me to drive to the UPS compount, 25 miles away, i'm not going to waist my fuel for you all, sorry. If you wish to use another shipping method I can use Fedex or DHL. I very much dislike using these other methods because I have had previous bad experiences personally and they are far away from me. You are also on your own if I ship outside of UPS. If I ship with UPS I can normally help when there is a shipping mixup because I know the agent I use and we can locate things for you. I refuse to have to deal with pawn workers at fedex or DHL. Also once an item is shipped it is the buyer's responsability, not ours.
Shipping costs: Even small items cost around 10 dollars to ship if you aren't prepared to pay, don't post or ask.
*New Shipping option* I am now also offering USPS Priority shipping for SOME items Please check with me for your specific parts requests and i'll try to help you all out.
04-28-2005, 04:57 PM
#4
Senior Member
Join Date: Jan 2005
Location: Greenwood AR
Posts: 831
RE Amemiya Twin Additional Injector Elbow for a Turbo FC(also fits N/a TB though) 65 Shipped
Two Round Carbon Fiber "CF" Planet Audio Speakers(2 way IIRC) that fit into the Rear towers using the stock Metal rings 35 Shipped
Pics of both please twinrotor87@aol.com.
Two Round Carbon Fiber "CF" Planet Audio Speakers(2 way IIRC) that fit into the Rear towers using the stock Metal rings 35 Shipped
Pics of both please twinrotor87@aol.com.
04-29-2005, 10:41 PM
#7
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Laredo, Tx
Posts: 423
I also have RP(rx7.com) underdrive pulleys, main and alternator. Like new condition.
65 Shipped in the US for the main pulley.
38 shipped for the Alt pulley.
I believe they are constructed of Alluminum.
65 Shipped in the US for the main pulley.
38 shipped for the Alt pulley.
I believe they are constructed of Alluminum.
04-29-2005, 10:57 PM
#9
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Laredo, Tx
Posts: 423
Compaq Armada Laptop for Tunning
O/s: Win 98 SE
Intel Pentium II Processor 233mhz IIRC
Memory:128mb
HHD:2GB
CD-ROM
Floppy drive
Serial Cable port
USB port
External monitor port
Parallel port
Two PCMCIA slots
IR interface
PS/2 Port
Head phone's jack
Mic Jack
Volume Control buttons(side)
Track point thing(little nub in the middle of the keys)
Integrated speakers
No dead pixels last time i checked
Battery holds charge well.
Power cable is included.
235+s/h
I also have a 3com 10/100 Lan card(PCMCIA) That I will include for an additional 7 dollars.
I take paypal. Lap top is sold as is. I can get vid caps of it running/charging/running on batt/running cd/etc.
I take paypal and have great feedback and lots of transactions under my belt.
Santiago PM me for details.
O/s: Win 98 SE
Intel Pentium II Processor 233mhz IIRC
Memory:128mb
HHD:2GB
CD-ROM
Floppy drive
Serial Cable port
USB port
External monitor port
Parallel port
Two PCMCIA slots
IR interface
PS/2 Port
Head phone's jack
Mic Jack
Volume Control buttons(side)
Track point thing(little nub in the middle of the keys)
Integrated speakers
No dead pixels last time i checked
Battery holds charge well.
Power cable is included.
235+s/h
I also have a 3com 10/100 Lan card(PCMCIA) That I will include for an additional 7 dollars.
I take paypal. Lap top is sold as is. I can get vid caps of it running/charging/running on batt/running cd/etc.
I take paypal and have great feedback and lots of transactions under my belt.
Santiago PM me for details.
