Lots Of Fc And 13b Goodies For Sale
05-02-2005, 10:54 AM
#1
Senior Member
Thread Starter
Join Date: Jun 2003
Location: Culpeper, VA
Posts: 572
Here are all the parts I am getting rid of:
I have an entire p-port engine for sale $1000, if no one wants it, then the parts are for sale of of it
New set of RA apex seals with springs $100
solid corner seals $45
RE corner seal springs $10
S4 NA rotors $55
P-Port rotor housings $400, pair
filled irons for p-port $200 for all 3
Other parts:
rotor housings good, $100 a pair, bad, $20 each
S4 irons good, $30, bad, $15
oil pan $20
set of S4 NA injectors $50
set of S4 T2 injectors $75
fuel rails $10
FC SS T4 turbo manifold with tial 38 wastegate $200
greddy type S bov $30
FC radiator $50
FC oil cooler $50
S4 T2 transmission $200
rear pumpkin $125
drive shaft $35
half shafts $35 for the pair
ACT 6 puck clutch $100, has about 3K on it, includes pressure plate
FC engine mounts $10
E-shafts $35
Gilmer belt drive system $85
FC Intake manifolds $35
Anything else you can think of, just ask and I can see if I have it.
I am pretty flexible on all the prices, so dont be affraid to give me an offer. All prices are without shipping, unless we work something out.
Thanks
I have an entire p-port engine for sale $1000, if no one wants it, then the parts are for sale of of it
New set of RA apex seals with springs $100
solid corner seals $45
RE corner seal springs $10
S4 NA rotors $55
P-Port rotor housings $400, pair
filled irons for p-port $200 for all 3
Other parts:
rotor housings good, $100 a pair, bad, $20 each
S4 irons good, $30, bad, $15
oil pan $20
set of S4 NA injectors $50
set of S4 T2 injectors $75
fuel rails $10
FC SS T4 turbo manifold with tial 38 wastegate $200
greddy type S bov $30
FC radiator $50
FC oil cooler $50
S4 T2 transmission $200
rear pumpkin $125
drive shaft $35
half shafts $35 for the pair
ACT 6 puck clutch $100, has about 3K on it, includes pressure plate
FC engine mounts $10
E-shafts $35
Gilmer belt drive system $85
FC Intake manifolds $35
Anything else you can think of, just ask and I can see if I have it.
I am pretty flexible on all the prices, so dont be affraid to give me an offer. All prices are without shipping, unless we work something out.
Thanks
05-02-2005, 12:16 PM
#5
Senior Member
Thread Starter
Join Date: Jun 2003
Location: Culpeper, VA
Posts: 572
Do not have a stock turbo.
The engine will cost between $150 and $500 to ship it depending on the shipping company you go with. I recommend FedEx freight. It is more expensive, but it will get there fast. They quoted me $200 if I bring it to a terminal and you pick it up at a terminal.
The 6 puck is not sprung, but its not as aggressive as everyone thinks. It feels like a normal clutch.
Forgot to mention that I also have a Microtech LTX8 with no wring harness. IT doesnt have a base map loaded, so if you want one loaded, you need to send it back and have them load one. $250 shipped.
The engine will cost between $150 and $500 to ship it depending on the shipping company you go with. I recommend FedEx freight. It is more expensive, but it will get there fast. They quoted me $200 if I bring it to a terminal and you pick it up at a terminal.
The 6 puck is not sprung, but its not as aggressive as everyone thinks. It feels like a normal clutch.
Forgot to mention that I also have a Microtech LTX8 with no wring harness. IT doesnt have a base map loaded, so if you want one loaded, you need to send it back and have them load one. $250 shipped.
05-02-2005, 01:58 PM
#7
Senior Member
Thread Starter
Join Date: Jun 2003
Location: Culpeper, VA
Posts: 572
Dont really know the specs on the p-port. Bought it used and it needed a rebuild. Here are some pics, maybe they will help.
Here are some other pics as well of random parts.
The exhaust pipe is from the DP to the y pipe I believe. $25
The radiator with fans is $75. Those fans are from a 91 MR2 and rock.
The exhaust is some random muffler made to replace the stock mufflers. It is a set, $75.
The large turbo there is a garret something. Dont really know. IT has a .60 compressor and a 1.11 exhaust. IT spooled great on my FC. It does need to be rebuilt. I found all the pieces on ebay and it came to about $150. I will sell the turbo for $100
I also have the Racing Beat headers, $50. I also have the piece after the headers. That piece is pretty rusted, so its basically only good for flanges. I will include that piece if you want it, but the shipping cost will go up.
Here are some other pics as well of random parts.
The exhaust pipe is from the DP to the y pipe I believe. $25
The radiator with fans is $75. Those fans are from a 91 MR2 and rock.
The exhaust is some random muffler made to replace the stock mufflers. It is a set, $75.
The large turbo there is a garret something. Dont really know. IT has a .60 compressor and a 1.11 exhaust. IT spooled great on my FC. It does need to be rebuilt. I found all the pieces on ebay and it came to about $150. I will sell the turbo for $100
I also have the Racing Beat headers, $50. I also have the piece after the headers. That piece is pretty rusted, so its basically only good for flanges. I will include that piece if you want it, but the shipping cost will go up.