Garage Cleaning! Give My Stuff A Good Home
08-30-2005, 01:16 PM
#1
Member
Thread Starter
Join Date: May 2003
Location: Albany, NY
Posts: 72
Hey everyone, I got to get my 79 Sa in the garage before winter, so I gotta clean it out. here's a list of stuff that's looking for a good home:
an '86 race preped chassis, with your choice of a 4 point bolt in / weild in roll cage , or a bolt in roll bar. Included is a rear differental (stock 86 gxl) and seats. all tar on the floor has been removed, and the floor has been primed. No carpets, still has door panels, guagues and switches etc. Has stock fuel system still functioning and battery reloacated. has round beam popup headlight mod. Full title, and papers. There is one rust hole about 1 inch and a 0.5 inch on the bottom front of the rear fender. has aluminum hood, comes with 1 set tires and rims. I want $500 for it.
an '90 convertable front clip, with 4 port engine and turbo tranny, held compression last time I checked. hood is gold, clip is dark blue. Interior stripped out, but still has steering shaft. No keys for igintion. I want $500 for it.
Aluminum front mounted intercooler, 2.5 inch inlet and outlet. It fits a 86 - 91 S4 / S5 radiator hole. about 2.5 inches thick. I paid $500 for it, and would like $300.
Rear transfer case from a 90 convertable, as well as aluminum driveshaft and stock half shafts. $200 obo.
I got various intakes, exhaust manfolds (both NA's and T2's) and stock air boxes / MAF's (both styles) too. Those I will take what I can get for them.
all this stuff is located in albany, ny (12309) and if u have any questions or interests PM me or email me at wolfgang.90@gmail.com
an '86 race preped chassis, with your choice of a 4 point bolt in / weild in roll cage , or a bolt in roll bar. Included is a rear differental (stock 86 gxl) and seats. all tar on the floor has been removed, and the floor has been primed. No carpets, still has door panels, guagues and switches etc. Has stock fuel system still functioning and battery reloacated. has round beam popup headlight mod. Full title, and papers. There is one rust hole about 1 inch and a 0.5 inch on the bottom front of the rear fender. has aluminum hood, comes with 1 set tires and rims. I want $500 for it.
an '90 convertable front clip, with 4 port engine and turbo tranny, held compression last time I checked. hood is gold, clip is dark blue. Interior stripped out, but still has steering shaft. No keys for igintion. I want $500 for it.
Aluminum front mounted intercooler, 2.5 inch inlet and outlet. It fits a 86 - 91 S4 / S5 radiator hole. about 2.5 inches thick. I paid $500 for it, and would like $300.
Rear transfer case from a 90 convertable, as well as aluminum driveshaft and stock half shafts. $200 obo.
I got various intakes, exhaust manfolds (both NA's and T2's) and stock air boxes / MAF's (both styles) too. Those I will take what I can get for them.
all this stuff is located in albany, ny (12309) and if u have any questions or interests PM me or email me at wolfgang.90@gmail.com
09-02-2005, 12:21 PM
#3
Member
Thread Starter
Join Date: May 2003
Location: Albany, NY
Posts: 72
it's 2.5 inch ID both in and out, I'll take some pictures of it tonight, and post them. If you want it, I have a friend who runs back and forth about once a month from albany and rochester. U could pick it up at her house.
09-03-2005, 10:26 AM
#4
Member
Join Date: Jun 2005
Location: Rochester, NY
Posts: 79
Sounds good. Yeah, get that picture up I'd like to take a look at it. Is this just an intercooler or do you also have the piping? Either way its a good deal, really. Is this a brand-name intercooler or a custom job?
09-06-2005, 11:06 PM
#5
Member
Thread Starter
Join Date: May 2003
Location: Albany, NY
Posts: 72
I got it off of ebay a while ago, it apears to be all cast but has no brand markings on it. I took some pictures to show you. The screwdriver onto is about 16 inches long, and the core fits perfectly infront of the radiator opening on a S4, It's just the intercooler, I never got around to building a turbo system, so I don't have piping or flex couplers. I talked to my friend and she's not going back until her next break, which is a while, so if u want it with any speed we should UPS it or you can pick it up
09-06-2005, 11:28 PM
#6
Member
Thread Starter
Join Date: May 2003
Location: Albany, NY
Posts: 72
[quote name='sublimike' date='Sep 3 2005, 07:26 AM']Sounds good. Yeah, get that picture up I'd like to take a look at it. Is this just an intercooler or do you also have the piping? Either way its a good deal, really. Is this a brand-name intercooler or a custom job?
[/quote]
I have no idea. I did not make it, the end tanks are cast (I think), and the core is obviously machine made so I am guessing it is some brand name, but I do not know which.
[snapback]754855[/snapback]
[/quote]
I have no idea. I did not make it, the end tanks are cast (I think), and the core is obviously machine made so I am guessing it is some brand name, but I do not know which.
09-07-2005, 12:39 PM
#8
Member
Thread Starter
Join Date: May 2003
Location: Albany, NY
Posts: 72
I got two convertable doors, they are in bad shape though. The trim is rusted, and there is no inner skin, nor switches, latches, etc. They are dark blue. They have power mirrors attached. One of the mirrors is missing a small chunk missing. If you want I can take pictures.
