Hey everyone, I got to get my 79 Sa in the garage before winter, so I gotta clean it out. here's a list of stuff that's looking for a good home:



an '86 race preped chassis, with your choice of a 4 point bolt in / weild in roll cage , or a bolt in roll bar. Included is a rear differental (stock 86 gxl) and seats. all tar on the floor has been removed, and the floor has been primed. No carpets, still has door panels, guagues and switches etc. Has stock fuel system still functioning and battery reloacated. has round beam popup headlight mod. Full title, and papers. There is one rust hole about 1 inch and a 0.5 inch on the bottom front of the rear fender. has aluminum hood, comes with 1 set tires and rims. I want $500 for it.



an '90 convertable front clip, with 4 port engine and turbo tranny, held compression last time I checked. hood is gold, clip is dark blue. Interior stripped out, but still has steering shaft. No keys for igintion. I want $500 for it.



Aluminum front mounted intercooler, 2.5 inch inlet and outlet. It fits a 86 - 91 S4 / S5 radiator hole. about 2.5 inches thick. I paid $500 for it, and would like $300.



Rear transfer case from a 90 convertable, as well as aluminum driveshaft and stock half shafts. $200 obo.



I got various intakes, exhaust manfolds (both NA's and T2's) and stock air boxes / MAF's (both styles) too. Those I will take what I can get for them.



all this stuff is located in albany, ny (12309) and if u have any questions or interests PM me or email me at wolfgang.90@gmail.com

Ooh, that intercooler is peaking my interest...I just found out about this forum and I'm going nuts!

it's 2.5 inch ID both in and out, I'll take some pictures of it tonight, and post them. If you want it, I have a friend who runs back and forth about once a month from albany and rochester. U could pick it up at her house.

Sounds good. Yeah, get that picture up I'd like to take a look at it. Is this just an intercooler or do you also have the piping? Either way its a good deal, really. Is this a brand-name intercooler or a custom job?

I got it off of ebay a while ago, it apears to be all cast but has no brand markings on it. I took some pictures to show you. The screwdriver onto is about 16 inches long, and the core fits perfectly infront of the radiator opening on a S4, It's just the intercooler, I never got around to building a turbo system, so I don't have piping or flex couplers. I talked to my friend and she's not going back until her next break, which is a while, so if u want it with any speed we should UPS it or you can pick it up

[quote name='sublimike' date='Sep 3 2005, 07:26 AM']Sounds good. Yeah, get that picture up I'd like to take a look at it. Is this just an intercooler or do you also have the piping? Either way its a good deal, really. Is this a brand-name intercooler or a custom job?


[/quote]



I have no idea. I did not make it, the end tanks are cast (I think), and the core is obviously machine made so I am guessing it is some brand name, but I do not know which.

have any vert doors? if so what color?

I got two convertable doors, they are in bad shape though. The trim is rusted, and there is no inner skin, nor switches, latches, etc. They are dark blue. They have power mirrors attached. One of the mirrors is missing a small chunk missing. If you want I can take pictures.

... but do the windows work!!!!!

I need the window regulators badly.

[quote name='annuerysm' date='Sep 7 2005, 12:30 PM']... but do the windows work!!!!!

I need the window regulators badly.


[/quote]

do you have a t2 dff avalible?

I know the drivers side did, because I had to power it up to get the window closed, I can check the other one this weekend. Do you also need the glass or just the regulator? It would be a lot easier for me to just send the regulator.

got the one off of my 90 convertable, which I beleve is the same housing with a lower gear ratio. It is in great shape. I also have an 86 rear diff if you want it, which has a higher gear ratio, but the 86 leaks out of the front seal, and I have not figured out what the problem is (except the kid who owned it before me liked to drop the clutch...)

my exhaust manifold has a hairline crack in it, but we did a smoke test and nothing came out so that's good. how much you want for a TII manifold? PM me and we can try to work something out. i'm gonna try looking for some flex couplers and piping for the intercooler, if they're not too much of a pain in the ass to find i might still be interested in it.

Do you have any s5 turbo rotors laying around?

No turbo engine parts, just a turbo manifold and the intercooler.

The front clip has gone to a good cause, it's reviving an 86. Thank you.

if only u were closer.......i really want that chassis!! lol



Free BUMP!

I'm sorry to have to let the chassis go, but at least if someone on the forums gets it, it will get used.... besides wisconsin is only a 15 hour drive one way... https://www.nopistons.com/forums/pub...IR#>/smile.png

lol, yeah, but i would be shot by my mother if i brought home anothe project!! lol plus i need my money for the RE swap!! i must resist!!! lol

do you have an s5 n/a intake upper and lower mani? if so how much would you want for it?

Are you looking for a 4 port or a 6? I have some 6 port parts prob if you wnat them, I was gonna use my S & K carbs on the 13b I got, so they will not work for me.

how about the 79 limited? any one want's that?