FS: NIB Techedge 2CO Wideband Kit
11-06-2008, 01:18 PM
#1
Member
Thread Starter
Join Date: Dec 2001
Location: White Lake, MI
Posts: 88
I am selling a brand new still in packaging 2.0 wideband kit from Techedge. I have the 2C0 model with all cables, 2.6m wideband cable, and necessary equipment to run the set up except for the LSU 7057 sensor (the part number has recently changed to 7200). This unit does not have onboard data-logging capabilities, but I do have the splitter and necessary cable so the output can be read through the gauge and your EMS on your PC and datalogged that way. I have the round 52mm display, LA1 intelligent display, so it fits into a gauge pod instead of the box display that looks terrible screwed to the dash.
Cut and pasted from Techedge's website: http://wbo2.com/2c0/default.htm
The 2C0 is Tech Edge's miniature wideband product. We designed it primarily for motorcycle use where its small size is important. 2C0 is also suitable for all wideband applications where the extra logging capabilities of the larger units is not required. 2C0 uses the larger M16 processor and has more evolved pump cell control technology as found in the all version 3 WBo2 units.
The 2C0 is housed in a tough ABS plastic case. It's small at 90 x 50 mm (credit card size) and 25 mm high.
WB02 to PC logging cable.
"Here's an image of the actual RS232 cable for connection between a PC and the WB unit. The cable is used for either logging to a PC, or for re-flashing its code (under control of a PC). If you need to extend the cable then a standard straight through male-female DB9 extension cable should be used (ie. not a cross-over or null modem cable)."
More info about the logging software available for this unit:
http://wbo2.com/sw/log.htm
"TEWBLOG (pronounced T-E W-B Log rather than tube-log!) is a Windows application (Win32) that logs data from Tech Edge Wide Band o2 Lambda Meters. Both immediate and on-board logging modes are supported for all models including those with 1 Mbyte on-board memory. Much of the the following information was written by TEWBLOG's author Justin Luton.
TEWBLOG has the following features to make tuning and monitoring your vehicles performance safe and simple :
* Large, easy to read gauges that display the data coming back from the sensors in real time.
* A running graph that plots the history of the gauges as the car is running. This makes it simple to look back in time a few seconds as you are driving.
* Completely configurable "gauges". Each of the gauges can be configured to display the data from most types of sensor that can be connected to the TE Wide Band device.
* Configurable realtime graphs. Each of the graphs can be configured to display the data how you like it to be displayed.
* Time stamped data for the TE-5301 and version 1.5 meters. (Accurate to 10ms)
* Data is stored in a simple CSV (comma separated value) for easy import into other applications for analysis
* Support for all of the current versions of the Tech Edge wide band hardware, including the original TE-5301 display, the v1.5, and now the v2.0 hardware.
In addition to those features, the registered version of the software has the following features (see next section for how to register) :
* No Nag screen when the program is started! :-)
* On screen review of the logged data, with the ability to zoom in/zoom out and look at specific values at any point in the graph.
* Time stamp display as points are selected in the graph.
* Fully configurable alarms. Alarms can be defined based on one or more of the "gauges" being in a specified range. Complex combinations of gauges can be combined to make accurate alarms.
* AutoTrigger - A feature that allows you to define the conditions (based on gauges) which will cause the software to automatically start logging data.
Go to Justin's TEWBLOG site, or just download the newest version 2.1e with support for 1 Mbyte logging memory, or get the older 2.1b TEWBLOG. Both are in ZIP format.
The 2.1e User's Guide (about 20 pages including table of contents) describes in detail how to use the logger software.
Software Registration
Although you do not have to register to use this product, Justin is currently accepting payment to register, using PayPal, for US$20. Note, if you sign up for PayPal now, you'll receive $5 from them just for signing up!
Click the PayPal icon above to send your payment. please be sure to INCLUDE THE REGISTERED USER'S FULL NAME WITH YOUR PAYMENT, failure to do so WILL DELAY THE PROCESSING OF YOUR REGISTRATION CODE! Once payment has been received, Justin will email your registration code within 72 hours.
When you receive the registration code, you'll be able to register your software by selecting the "Register" button that's displayed when you run TEWBLOG. Then enter your name, and the code you received (Both should be entered exactly as provided in the registration email. We suggest you copy and paste the details from the email).
Click the OK button, and if all is well, you will be prompted that the software has been registered.
$275 shipped to cont USA. Add 3% for paypal.
Cut and pasted from Techedge's website: http://wbo2.com/2c0/default.htm
The 2C0 is Tech Edge's miniature wideband product. We designed it primarily for motorcycle use where its small size is important. 2C0 is also suitable for all wideband applications where the extra logging capabilities of the larger units is not required. 2C0 uses the larger M16 processor and has more evolved pump cell control technology as found in the all version 3 WBo2 units.
The 2C0 is housed in a tough ABS plastic case. It's small at 90 x 50 mm (credit card size) and 25 mm high.
WB02 to PC logging cable.
"Here's an image of the actual RS232 cable for connection between a PC and the WB unit. The cable is used for either logging to a PC, or for re-flashing its code (under control of a PC). If you need to extend the cable then a standard straight through male-female DB9 extension cable should be used (ie. not a cross-over or null modem cable)."
More info about the logging software available for this unit:
http://wbo2.com/sw/log.htm
"TEWBLOG (pronounced T-E W-B Log rather than tube-log!) is a Windows application (Win32) that logs data from Tech Edge Wide Band o2 Lambda Meters. Both immediate and on-board logging modes are supported for all models including those with 1 Mbyte on-board memory. Much of the the following information was written by TEWBLOG's author Justin Luton.
TEWBLOG has the following features to make tuning and monitoring your vehicles performance safe and simple :
* Large, easy to read gauges that display the data coming back from the sensors in real time.
* A running graph that plots the history of the gauges as the car is running. This makes it simple to look back in time a few seconds as you are driving.
* Completely configurable "gauges". Each of the gauges can be configured to display the data from most types of sensor that can be connected to the TE Wide Band device.
* Configurable realtime graphs. Each of the graphs can be configured to display the data how you like it to be displayed.
* Time stamped data for the TE-5301 and version 1.5 meters. (Accurate to 10ms)
* Data is stored in a simple CSV (comma separated value) for easy import into other applications for analysis
* Support for all of the current versions of the Tech Edge wide band hardware, including the original TE-5301 display, the v1.5, and now the v2.0 hardware.
In addition to those features, the registered version of the software has the following features (see next section for how to register) :
* No Nag screen when the program is started! :-)
* On screen review of the logged data, with the ability to zoom in/zoom out and look at specific values at any point in the graph.
* Time stamp display as points are selected in the graph.
* Fully configurable alarms. Alarms can be defined based on one or more of the "gauges" being in a specified range. Complex combinations of gauges can be combined to make accurate alarms.
* AutoTrigger - A feature that allows you to define the conditions (based on gauges) which will cause the software to automatically start logging data.
Go to Justin's TEWBLOG site, or just download the newest version 2.1e with support for 1 Mbyte logging memory, or get the older 2.1b TEWBLOG. Both are in ZIP format.
The 2.1e User's Guide (about 20 pages including table of contents) describes in detail how to use the logger software.
Software Registration
Although you do not have to register to use this product, Justin is currently accepting payment to register, using PayPal, for US$20. Note, if you sign up for PayPal now, you'll receive $5 from them just for signing up!
Click the PayPal icon above to send your payment. please be sure to INCLUDE THE REGISTERED USER'S FULL NAME WITH YOUR PAYMENT, failure to do so WILL DELAY THE PROCESSING OF YOUR REGISTRATION CODE! Once payment has been received, Justin will email your registration code within 72 hours.
When you receive the registration code, you'll be able to register your software by selecting the "Register" button that's displayed when you run TEWBLOG. Then enter your name, and the code you received (Both should be entered exactly as provided in the registration email. We suggest you copy and paste the details from the email).
Click the OK button, and if all is well, you will be prompted that the software has been registered.
$275 shipped to cont USA. Add 3% for paypal.
Thread
Thread Starter
Forum
Replies
Last Post
neoamd
RX-7 & RX-8 Parts For Sale & Wanted
0
11-08-2007 04:39 PM
rotorbrain
RX-7 & RX-8 Parts For Sale & Wanted
0
10-05-2005 02:48 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
