I have a BRAND SPANKIN NEW C-west fiberglass body kit (c-west front bumper, c-west rear bumper, and mazdaspeed GTC side skirts -- which IMHO look better than the c-west sideskirts) that i unfortunately have to sell
im givin the forum peeps 1st dibs before I put it on ebay reason im selling is im scheduled w/ the body shop only a week from now, but i got in an accident a few days back, and now i need the money to fix up the car... sux 4 me...but wutev. my loss is ur gain. This kit has NEVER been used before. never mounted. never touched. In fact, it's still in the original box w/ original wrapping. I got it from rx7store/rx7trix (i believe rotaryextreme makes this replica kit), so you know it's good quality stuff and is a tight fit...not the cheap kind that'll crack and is a nightmare to fit. THIS IS A US-SPEC KIT. No modification of the front bumper supports is necessary (you can check w/ rx7store/rx7trix on this...) This should save you a BUNDLE over other replicas that may require hours of modification to fit... this kit retails for $1650 on their website...feel free to check for yourself. will take reasonable offers, considering it's brand new. (attached is a pic of the c west kit & mazdaspeed sideskirts on a friend's Fd..in case you're wondering wut the combo would look like) Note: I am looking for a PFS intercooler, so trades are welcome https://www.nopistons.com/forums/pub...#>/biggrin.png |
1 Attachment(s)
thought id add this pic cuz i noticed the sideskirts are kinda dark in the other pic...
|
would you sell just the front and rear?
|
provided i find a buyer for the sideskirts...yea
|
How much for the front only- PM me. Thanks-
|
Your friends FD is very nice! Thats a clean looking kit...the second wing looks much better...bump for ya too.
|
Where are you located?
|
What kind of wheels is your friend using? Size and offset? Any suspension mods? Thanks!
|
how much for the side skirts https://www.nopistons.com/forums/pub...#>/biggrin.png
|
007, honestly, i haven't even given a thought to sellin the front bumper separately. that's not to say i wont..provided i find a buyer for the rear and sideskirts. point is, i aint tryin 2 get stuck w/ any of these parts...cuz i cant do anythin w/ 'em now.
rotaryrocket...yea thanx 4 the bump. and it DOES look hot, dont it? =) 93 R1, im in northern VA...pm me for more details coyote, i think my friend's got it slightly dropped, but i dont know the specifics. ill ask him and get back 2 ya. harrass me if i 4get =) 1fastsvn...same as above to 007. vspec seemed interested in front and rear... 007 in front, and u in sideskirts. if u guys r serious, then im sure we can work somethin out |
yeah i am still interested in the front and rear. pm me a price.
Harrison |
Do you have the 99 spec lights for it?
|
Hold up guys...
I'll buy the whole KIT.. Where in NoVa are you?? I used to work in Ashburn @ Wcom. So I know NOVA pretty well. I'll come pick it up... PM Me how much you want for the whole set. |
and Yea what Justin asked.
You got the Combo lights for the bumper?? I would think you got them when you bought the body kit.. |
actually, combo lights im keepin 4 another application...
FYI: those lites are $400 solid anywhere in the US...and the kit retails for $1850 w/ the lights...vs. the $1650 w/o the lights (yea i know that's only a diff of only $200, but they give u a discount if u buy the front bumper w/ the lights)... FD Three S, PMed u. Oh and if anyone is REALLY interested in the lights, there r a cpl ppl sellin 'em rite now on the forum (but again, for like $350) |
since a lotta ppl have expressed interest in the combo lights, i can get ahold of another set, which ill let go for about $375ish OBO
|
coyote...here's ur reply:
<<well i have racing beat springs with ohlins shocks. and the rims i have are from japan. the brand is longchamp but they were made by ssr. the rims are 17by 8.5 in front and 17 by 9.5 in rear>> |
Originally Posted by FDNewbie' date='Sep 11 2003, 10:04 AM
coyote...here's ur reply:
<<well i have racing beat springs with ohlins shocks. and the rims i have are from japan. the brand is longchamp but they were made by ssr. the rims are 17by 8.5 in front and 17 by 9.5 in rear>> |
<< Any fender rubbing?>>
apparently not. |
wheel offsets? https://www.nopistons.com/forums/pub...IR#>/smile.png
|
dawg...ur killin me lol. didja know im tryin 2 sell a body kit here?! hehe
j/k..it's cool. it's a bump, aint it? https://www.nopistons.com/forums/pub...DIR#>/wink.png imma hafta email and ask him again |
https://www.nopistons.com/forums/pub...1047683621.gif my bad dude! I thought you sold it already! https://www.nopistons.com/forums/pub...IR#>/smile.png
|
as requested...here r some pics...
this is the front bumper... |
btw...those dark spots on the front of the front bumper are almost all just some dirt from the box...
there are very minor spots where the primer chipped off...but it shouldn't be any concern, since a good body shop re-primers the bumpers anyways, after doin any shaving/sanding as necessary.... here's another pic of the front bumper, but from the other side, showin the mesh... |
1 Attachment(s)
...
|
1 Attachment(s)
ok those pics were too big lol...the rest r a better size...
here's the rear bumper |
1 Attachment(s)
side shot of the rear bumper...shows the brake ducts, which on many bumpers dont come pre-cut..un4tunately. so u get luck w/ this one =)
|
1 Attachment(s)
the sideskirts...
|
detailed pic of sideskirts...
|
1 Attachment(s)
another detailed pic of the sideskirt...
|
1 Attachment(s)
last pic...
|
Can you get a picture of the Rear bumper mounted??
I am tring to picture it but can't. ISn't our OEM bumper one piece up to the rear light combos??? SO does the Bumper need to be cut to mount the rear bu mper?? also the Two holes on the bumper, where I believe the reflectors go, What are the holes for??? or are they just open?? it doesn't look like the reflectors would fit in them.. nevertheless a picture of the rear bumper mounted wold be nice. |
1 Attachment(s)
the OEM bumper stops rite underneath the trunk lock cylinder. so no it doesn't extend all the way to the rear brake lights
no cutting at all should be required. as w/ all kits, some slight sanding etc, but no cutting. simply bolt on (unless ur getting it molded...) there r 4 sets holes in the rear bumper... - one's for the lower reflectors, on either side of the license plate holder. these also have the white reverse lights... - there is a hole to mount the license plate... - another hole rite above the license plate mount, which id imagine is for the license plate illumination lites (never really checked to c if FDs have those...) - and the last light, which i presume ur askin about is the one wayy toward the far bottom corners/edges of the bumper, correct? those are actually brake ducts....a lot of c west bumpers dont come w/ them pre-cut, but it is actually part of the c-west rear bumper design. ppl just get 'em covered w/ mesh...and they are supposed to "ventilate" for ur brakes & rotors i guess. although they may be functional, id say almost all body kits are more for asthetics than anything else.... i actually took a pic of that specifically to show that they're precut..save ya the work... here's the best pic i got of it mounted. un4tunately, this pic doesn't have that brake duct in it, since my friend didnt get his cut out... |
1 Attachment(s)
here's a closeup in case u wanted one...
|
bump...
|
FDnewbie..
Am I the only one that see's this..??? But the picture of the rear bumper that you posted. can't be the Same bumper that is in the picture with it mounted. Just look at where the LIcense plate would go. IT isn't the same.. Do you think they sent you the wrong bumper or something??? Seriously Just look.. |
yeah I'm gonna say that definately isn't the same. The pic on the red car the license plate area is squared off. The pic you posted its kinda oval shaped....Wierd?
|
FD THREE S & 93 R1 THANK YOUUUU!!!!!!!
Man...real nice save guys. U have no IDEA how much i appreciate it. I never really realized the rear bumper was diff...and prob would never have, cuz i never got a chance to even mount 'em. I woulda felt sooo bad if i had sold 'em like that to someone else, and they got stuck w/ the wrong bumper...damn...good catch guys. Sorry it took so long to reply, but we had major power loss issues over here cuz of the hurricane...go figure Good news is i just spoke to the shop, and they got a rear bumper packaged and waitin to be sent off to me 1st thing monday morning...so the sale is still on. w/ the REAL rear bumper hehe it should be here by the end of the week...and of course ill make sure i post a pic of it when it comes in =) hopefully that's the last concern... considern everything else is in order, anyone still interested in the whole kit or the front & rear, PM me. (got an offer on the sideskirts which ill take if i dont get an offer on the whole kit..) |
No problem man. I just wish I had the cash right now to take this off your hands
|
Those are not the Roatry Extreme kit. Our kit comes with gray gel coat and it does not have any of those mesh.
Your rear bumper is definitely not a C West style. Chuck Huang |
All times are GMT -5. The time now is 02:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands