Fs: Block Off Plates For Fc / Fd / Cosmo
Thread Starter
Senior Member
Joined: Jan 2002
Posts: 1,145
From: San Jose, CA
I forgot to re-do this thread after the forum was hacked, so here it is again!
I sell 1/8th thick stainless steel block off plates for all 2nd gens and the 3rd gen. Also, for those of you doing or have done cosmo swaps, I have kits for 20B/13B-RE motors as well. All the plates come with stainless steel hardward and a hex key for easy installation.
If the stock gasket is intact, nothing extra is needed, or you can scrape the old gasket off and use a bead of RTV to seal the plate.
You can purchase the plates either by the kit, or only buy the exact ones you need.
http://www.2751engineering.com/2751parts.html
Feel free to PM me or send me an IM if you have any questions. I ship same day, most of the time it takes 2-3 days to arrive from when I ship.
I sell 1/8th thick stainless steel block off plates for all 2nd gens and the 3rd gen. Also, for those of you doing or have done cosmo swaps, I have kits for 20B/13B-RE motors as well. All the plates come with stainless steel hardward and a hex key for easy installation.
If the stock gasket is intact, nothing extra is needed, or you can scrape the old gasket off and use a bead of RTV to seal the plate.
You can purchase the plates either by the kit, or only buy the exact ones you need.
http://www.2751engineering.com/2751parts.html
Feel free to PM me or send me an IM if you have any questions. I ship same day, most of the time it takes 2-3 days to arrive from when I ship.
Thread Starter
Senior Member
Joined: Jan 2002
Posts: 1,145
From: San Jose, CA
Originally Posted by SPADE_LuCK' date='Feb 4 2005, 11:49 AM
i know this sounds stupid..........but i never understood the point of the block off plates.
arent they just like gaskets?
if they are then i might be interested in buying a whole set for a s5 tll.
arent they just like gaskets?
if they are then i might be interested in buying a whole set for a s5 tll.
They allow you to remove unneccessary equipment. Say for instance you are no longer running a cat, you can remove the ACV, put a block off plate in its place and block off the split air port. You eliminate any possibility of a vacuum leak by removing the ACV and it gives the engine a much cleaner look.
Super Moderator
Joined: Feb 2002
Posts: 12,288
From: Amityville, New York
got my FC S5 TII set today, they are great, anyone who thinks they can save $35 and make these themselves are foolish, the hardware is top notch and the plates themselves are very precisely cut.
the stainless hardware gets me very excited!
the stainless hardware gets me very excited!
Senior Member
Joined: Nov 2003
Posts: 228
From: Caldwell, Idaho
Still sellin' these? I'll probably paypal within this week if so... email me at kornmanxxx@yahoo.com (I don't come on this site much) to remind me... It'd be for an s5 TII......thx man
