FD and FC parts
08-06-2008, 02:07 PM
#1
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Kissimmee FL.
Posts: 1,579
for FD
oil pump complete with chain and gear - 50
Jay tech style manifold (never used) - 200
Stainless 3 inch down pipe (never used) -100
stock flywheel 30
lower intake manifold with block off plates installed 20
engine harness, may have some broken connectors. not sure wich ones. 50
front cover with AN fitting 35
oil pan 25
water pump with water pump housing 35
alternator 75
motor mounts 25
coil pack set up with plugs 35
Greddy strut bar 100
bose sound system from touring model 50
drive shaft 75
S5 TII things
jdm s5 turbo and manifold - 200
flow meter 50
uper intake manifold with throttle body and block off plates 50
oil metering pump
random things
a holley carb, dont know the size - 50
TII gauge pod in new in box, and another out of box. - 20 for both
MSD blaster coil - 10
ACCEL 300+ 75
oil pump complete with chain and gear - 50
Jay tech style manifold (never used) - 200
Stainless 3 inch down pipe (never used) -100
stock flywheel 30
lower intake manifold with block off plates installed 20
engine harness, may have some broken connectors. not sure wich ones. 50
front cover with AN fitting 35
oil pan 25
water pump with water pump housing 35
alternator 75
motor mounts 25
coil pack set up with plugs 35
Greddy strut bar 100
bose sound system from touring model 50
drive shaft 75
S5 TII things
jdm s5 turbo and manifold - 200
flow meter 50
uper intake manifold with throttle body and block off plates 50
oil metering pump
random things
a holley carb, dont know the size - 50
TII gauge pod in new in box, and another out of box. - 20 for both
MSD blaster coil - 10
ACCEL 300+ 75
08-06-2008, 02:41 PM
#3
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Kissimmee FL.
Posts: 1,579
also:
S5 TII oil metering pump
FC1000 (does not work, dont know why. can get it fixed cheap by Jacobs) - 40
Greddy pulleys for FD ( main, water pump, ans alternator) 150
FD stock upper and lower fuel rail in injectors 50
and in the last pics theres a shot of the custom racing throttle body intake manifold and jay tech manifold. i'll sell the whole set up for $400!!! or custom manifold and throttle body for 250
and this brand new, never used 60-1 Precision Turbo kit!!! COMPLETE!!! 3 inch downpipe is ceramic coated. the wastegate has a v-band dump to downpipe.
1800
S5 TII oil metering pump
FC1000 (does not work, dont know why. can get it fixed cheap by Jacobs) - 40
Greddy pulleys for FD ( main, water pump, ans alternator) 150
FD stock upper and lower fuel rail in injectors 50
and in the last pics theres a shot of the custom racing throttle body intake manifold and jay tech manifold. i'll sell the whole set up for $400!!! or custom manifold and throttle body for 250
and this brand new, never used 60-1 Precision Turbo kit!!! COMPLETE!!! 3 inch downpipe is ceramic coated. the wastegate has a v-band dump to downpipe.
1800
08-06-2008, 02:50 PM
#4
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Kissimmee FL.
Posts: 1,579
i will consider trades...
what im looking for:
Weld wheels to fit 5 lug FC.
TII rear
TII tranny
FC S5 front bumper
S5 front lip
turbo (.70 or bigger cold side)
FC roll cage
aftermarket radiator for FC
and other racing **** for FC's!!! lol...
what im looking for:
Weld wheels to fit 5 lug FC.
TII rear
TII tranny
FC S5 front bumper
S5 front lip
turbo (.70 or bigger cold side)
FC roll cage
aftermarket radiator for FC
and other racing **** for FC's!!! lol...
08-06-2008, 06:07 PM
#6
Senior Member
Join Date: Sep 2003
Location: Albany, New York
Posts: 571
I have a JDM S4 TII tranny that I do not know the condition of (meaning driveability). Sitting on the crate it shifts fine and the splines look good, but like I said I dont know the driveability condition. You can have it for $50.00 plus shipping if you are interested. PM me or email me @ cps87rx7se@yahoo.com
08-06-2008, 07:15 PM
#8
Member
Join Date: Sep 2007
Posts: 87
"flow meter 50"
is this the N370? if so will you take 55$ shipped for it? lemme by email please
Mazdaracer4fun@aol.com
is this the N370? if so will you take 55$ shipped for it? lemme by email please
Mazdaracer4fun@aol.com