Getting much closer to finishing this project up.



Decided to do the FD intake swap. I think it looks much better. It requires some massive grinding... to match the ports, but hey it's Aluminum. If you have done a port job, this is much easier. weld up the outter holes and redrill you new ones. I've got my electric fan installed. I had orginally bought a 16" unit, but it was too big, so I have a 2000 CFM 14" unit. Radiator is a 3" core unit so cooling shouldn't be a problem.



http://daczone.com/newmotor/newmotor1.jpg



http://daczone.com/newmotor/newmotor2.jpg



http://daczone.com/newmotor/newmotor3.jpg



http://daczone.com/newmotor/newmotor4.jpg



http://daczone.com/newmotor/newmotor5.jpg