Project Zuki Update
06-05-2008, 11:09 PM
#1
Senior Member
Thread Starter
Join Date: Oct 2001
Location: Portland, OR
Posts: 790
Getting much closer to finishing this project up.
Decided to do the FD intake swap. I think it looks much better. It requires some massive grinding... to match the ports, but hey it's Aluminum. If you have done a port job, this is much easier. weld up the outter holes and redrill you new ones. I've got my electric fan installed. I had orginally bought a 16" unit, but it was too big, so I have a 2000 CFM 14" unit. Radiator is a 3" core unit so cooling shouldn't be a problem.
Decided to do the FD intake swap. I think it looks much better. It requires some massive grinding... to match the ports, but hey it's Aluminum. If you have done a port job, this is much easier. weld up the outter holes and redrill you new ones. I've got my electric fan installed. I had orginally bought a 16" unit, but it was too big, so I have a 2000 CFM 14" unit. Radiator is a 3" core unit so cooling shouldn't be a problem.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)