alright what were the years that had the same TII tranny. and i was told by turborotor and 75 repu, all that would be needed was the engine, wiring harness off the same motor and custom bellhousing. anyone seen a B2000 13b? anyone have advise. i found a couple in the paper for like 1000 - 1800. pics would be appreciated too



ryan

 

the 87-93 b2600 has basically a t2 tranny with a piston engine bellhousing. so all you need is the motor, and the rotary bell housing.



the other trucks you need to swap the whole transmission case/transmission and its not as strong



mike

 

judge ito built a few .... his were BEASTS though

 

okay so its the b2600. and thats what i heard vosko. he put down some great #'s with those trucks, but he prolly had some secret porting job on it

 

that helps along with money

 

I;ve got a friend that has been thinking about doing, it's also something I would like to if funds permitted.

 

yeah funds always seem to be a problem! esp w/ me!

 

Isn't the 2200 and 2600 the same.I have a 89 2200 I was considering going 13b carbed NA for ***** and giggles.

 

B2600 has the trans with the removable bellhousing so it's easy to swap the T2 housing on and toss the 13b in there From what I understand anyways... Maybe the b2000 and b2200 have a trans simalar to the n/a FB/FC transmissions?

 

yep, thats right. the 2000/2200 have an na fb/fc style tranny, while the b2600 has the turbo 2 style tranny



mike