1Revvin7

Plucking took 3 hours.

1Revvin7

Hard starting, lots of flooding and a compression test revealed the need for a rebuild.

1Revvin7

Front cover off

1Revvin7

Almost!

1Revvin7

Now this is the craziness! The corner of an apex seal broke. It smashed into the corner seal which broke the adjacent side seal( pictured), The sideseal spring went who knows were along with all 3 corner seal plugs! Then the sideseal smashed into the other sides corner seal and split it in half!

1Revvin7

Apex seal missing a chunk of the corner right next to the corner section of the seal.

1Revvin7

Split corner seal..

1Revvin7

The split corner seal chipped a little off of the edge of the housing. And the missing chunk in the apex seal made a tiny gash near the exhaust port.

1Revvin7

Needs ALL new bearings.

1Revvin7

Front Iron has 2 missing sections of iron near the o-ring groove. The o ring was intact but the car only idled in my possession. This car needed a definate rebuild. Iron will be replaced.